DOCUMENT:Q137310 17-DEC-2000 [win95x] TITLE :Audio CD Not Recognized in IDE CD-ROM Drive PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:95 OPER/SYS: KEYWORDS:win95 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows 95 ------------------------------------------------------------------------------- SYMPTOMS ======== When you insert a particular audio CD in the CD-ROM drive, it may not be recognized and CD Player may not be started automatically, even if the Auto Insert Notification option is turned on. If you start CD Player manually, the CD-ROM drive light may flash continuously, and you may receive the following message: Data or no disc loaded Please insert an audio compact disc. Most other audio CDs are recognized automatically. CAUSE ===== Your IDE CD-ROM drive is not fully compatible with the ATAPI 1.2 specification for IDE CD-ROM drives. RESOLUTION ========== Contact the manufacturer of the CD-ROM drive about obtaining a firmware update to bring the drive into compliance with the ATAPI 1.2 specification. This issue is resolved by the following updated file(s) for Windows 95, and later versions of these file(s): SCSI1HLP.VXD version 4.00.951 dated 9/5/95 19,189 bytes A version of this file which resolves this issue is available from the following sources: 1. As part of the CD Changer update. See the following article in the Microsoft Knowledge Base: Q140510 Not All CD-ROM Changer Drives Visible in Windows 95 2. In the Microsoft Windows 95 Service Pack 1. See the following article in the Microsoft Knowledge Base: Q142794 Availability of Microsoft Windows 95 Service Pack 1 STATUS ====== This issue is resolved in Microsoft Windows 98. MORE INFORMATION ================ The following IDE CD-ROM drives are known to exhibit the behavior described in this article: Manufacturer Model Firmware revision ------------------------------------------------- Panasonic/Matsushita CR-581 Earlier than 1.04 NEC 273 Earlier than 4.21 This behavior occurs with a few audio CDs that are mastered in an unusual manner. Normally, track 1 begins at the 2-second mark on the disc. On the audio CDs that trigger this behavior, track 1 does not begin at the 2- second mark. When the Windows 95 CD-ROM driver attempts to locate track 1, the drive reports a status that is not expected under the ATAPI 1.2 specification. Based on the status returned from the drive, the Windows 95 CD-ROM driver tries to find track 1 continuously, never receiving the expected result code from the drive. The following audio CDs are known to cause this behavior: Title Artist Publisher ----------------------------------------- Shepherd Moons Enya Reprise Records For additional information about Windows 95 updates, please see the following article in the Microsoft Knowledge Base: Q161020 Implementing Windows 95 Updates ====================================================================== Keywords : win95 Technology : kbWin95search kbZNotKeyword3 Version : 95 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.