DOCUMENT:Q133350 28-JUL-2001 [win95x] TITLE :Cannot Map Drives to More Than Eight NetWare Servers PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:95 OPER/SYS: KEYWORDS:3rdpartynet msnets win95 kb3rdPartyNetClient ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows 95 ------------------------------------------------------------------------------- SYMPTOMS ======== When you try to map a drive to a Novell NetWare server, you may receive the following message: Before you can connect to another server, you must detach from one or more of the listed servers. CAUSE ===== The Microsoft Client for NetWare Networks defaults to a maximum of eight mapped NetWare servers. RESOLUTION ========== To work around this behavior, use one of the following methods: Method 1 -------- Connect to the server using a Universal Naming Convention name. This bypasses the default connection limit because UNC connections do not use drive letters. Click the Start button, click Run, and then type "\\\" (without quotation marks) in the Open box, where is the server name and is the name of the share on the server. This is a "manual" connection that does not remain mapped to the server when you restart the computer. Method 2 -------- Change or add the "CONNECTIONS=" line in the Net.cfg file. A default value of 8 is used if there is no "CONNECTIONS=" entry in the Net.cfg file. Add this line with a value of up to 50, or change the line to a value of up to 50. Then, remove the network components in Windows 95. Restart your computer and reinstall the network components. After you reinstall the network components you should be able to map as many drives as the value in the "CONNECTIONS=" line in the Net.cfg file. The Net.cfg file is a NetWare support file. This file is not included with Windows 95. MORE INFORMATION ================ The default maximum number of server connections that NetWare 3.1x allows is eight. The Microsoft Client for NetWare Networks uses the same default value. This restriction does not affect the number of drives that can be mapped. It affects only the number of servers you can map a drive to. Additional query words: detaching servers ====================================================================== Keywords : 3rdpartynet msnets win95 kb3rdPartyNetClient Technology : kbWin95search kbZNotKeyword3 Version : 95 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.