DOCUMENT:Q132957 04-FEB-2002 [win95x] TITLE :Removable-Media Drives Not Automatically Mounted at Startup PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:: OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows 95 ------------------------------------------------------------------------------- SYMPTOMS ======== When you start Windows 95, a compressed volume on a removable-media drive (such as a Bernoulli or Syquest drive) may not be automatically mounted. CAUSE ===== This problem can occur if the computer has two floppy disk drives and the following settings exist in the Drvspace.ini file: - MaxRemovableDrives=2 - AutoMount=1 RESOLUTION ========== To correct this problem, increase the value of the MaxRemovableDrives setting to match the total number of removable-media drives in the computer. For example, if your computer has two floppy disk drives and a double Bernoulli drive, use the setting "MaxRemovableDrives=4" (two floppy disk drives plus two Bernoulli drives). To edit the Drvspace.ini file, follow these steps. 1. Using Windows Explorer, locate the Drvspace.ini file in the root directory of the boot drive. 2. Use the right mouse button to click the Drvspace.ini file, then click Properties on the menu that appears. 3. Click the Read-only check box to clear it, then click OK. 4. Double-click the Drvspace.ini file to open it. 5. Make either of the following changes to the file: - Change the value of the MaxRemovableDrives setting to match the total number of removable-media drives. -or- - Set the AutoMount entry to the drive letters assigned to the removable-media drives. For example, if you have a double Bernoulli drive with drive letters D and E assigned to the drive, use the setting "AutoMount=DE." 6. Save and then close the file. MORE INFORMATION ================ Note that when you are using an Iomega RCD driver with a double Bernoulli drive, you may receive a "General Failure" error message the first time you access the second drive. This causes automatic activation and automatic mounting to fail. Using an Iomega OAD or SCSI driver resolves the problem. The third-party products discussed in this article are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: automount autoactivate cvf ====================================================================== Keywords : Technology : kbWin95search kbZNotKeyword3 Version : : ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.