Using Btrieve with Windows 95

Last reviewed: July 9, 1996
Article ID: Q118629
The information in this article applies to:
  • Microsoft Windows 95

SUMMARY

Btrieve is a key-indexed record management system. It is usually installed in a client-server configuration in which the server is a Novell NetWare file server.

BREQUEST.EXE is installed on the client machine and is required in order to have access to files on a Btrieve server. For Windows 95, you must use Btrieve version 5.15c or later.

MORE INFORMATION

BREQUEST.EXE requires IPX/SPX; therefore, Windows 95 is configured differently depending on the Novell NetWare client software you are using.

Using the Microsoft Client for NetWare

  • Verify that the workstation can communicate with the NetWare server that contains the Btrieve databases.
  • Create a WINSTART.BAT file that contains BREQUEST.EXE. This allows Windows 95 to start the IPX/SPX protocol interface.
  • Make sure that WBTRCALL.DLL (Windows Btrieve DPMI DLL file) is located in the Windows 95 SYSTEM subdirectory.

NOTE: This configuration provides BREQUEST.EXE to Windows-based applications only. For BREQUEST.EXE to be available for MS-DOS-based applications, it must be loaded in an MS-DOS prompt.

Using a Novell-Supplied Network Client with Windows 95

Refer to the Btrieve "Installation and Operation" manual for installation instructions in this environment.

Key Points:

  • Make sure that WBTRCALL.DLL is located in the Windows 95 SYSTEM subdirectory.
  • Make sure that BREQUEST.EXE is loading without error messages after the real-mode network software is started.
  • If you are loading NETX or VLM, set up Btrieve as you normally do.

For more information about installing and using Btrieve, contact the program's manufacturer.

Btrieve is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.


KBCategory: kb3rdparty kbprb kbnetwork
KBSubcategory: wpp95 win95 3rdpartynet appscomp
Additional reference words: 95 berequest betrieve 6.10 5.15c 3rdparty


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: July 9, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.