DOCUMENT:Q75008 30-OCT-1999 [win16ddk] TITLE :Virtual Display Device I/O Trapping PRODUCT :Microsoft Windows Device Driver Kit PROD/VER::3.0,3.1,3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows Device Development Kit (DDK) for Windows, versions 3.0, 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= In the Microsoft Windows graphical environment, the virtual display device (VDD), is the virtual device (VxD) responsible for all input and output to the display adapter. The VDD must maintain a data structure that contains enough I/O register values to program the display adapter, and it must provide for emulating I/O when the virtual machine (VM) accessing the I/O port does not own the physical display. VDD performs these operations by reading and writing the I/O ports when it switches ownership of the display, and by trapping I/O operations and saving the data. The routines that enable and disable trapping and handling the traps are in the VDDTIO.ASM module. MORE INFORMATION ================ Enabling and Disabling I/O Trapping ----------------------------------- During initialization, all I/O ports associated with the display should be trapped. This is accomplished by installing I/O trapping handlers and not disabling the trapping. When initialization of the VDD and the system VM is complete, trapping of the ports should be disabled. If the state of the hardware is not readable, then the Windows display driver must assume and maintain some standard state of the display. When switching back to the system VM, Windows will restore that standard state; the display driver is responsible for doing any additional work required. The VxD and the display driver may be required to call each other through some callback mechanism. In many cases, the existing Interrupt 2F Functions 4000h through 4007h mechanism is sufficient. For more information see pages 18 and 19 of the "Microsoft Windows Device Driver Kit: Device Driver Adaptation Guide" for Windows 3.1 or pages 2-15 and 2-16 of the "Microsoft Windows Device Development Kit Device Driver Adaptation Guide" for Windows 3.0. When Windows creates another VM, the VDD must first initialize the new VM's virtual state and must place the hardware into that state if the VM is running full screen. From this point on, the I/O ports should be trapped as infrequently as possible. Specifically, do not trap the I/O ports when the VM that owns the display is running. However, it is not a good idea to change the trapping state each time a VM is scheduled because the program running in the VM may not access the display at all. A good way to handle this is to turn on trapping and disable access to memory when the VM that owns the display loses control of one or more of the registers. Restore the entire state and disable trapping when the VM touches I/O ports or memory. While the Windows 3.0 VDD for EGA/VGA restores the registers through a VM event each time the display owner is run, the Windows 3.1 VDD waits for a display access before it restores the state. Be sure to note that there are three bits in the program information file (PIF) through which the user can specify that trapping is enabled in a VM. If the code can successfully perform all of the needed operations without trapping (in other words, the driver can read the state of the hardware completely), then the driver can ignore these bits. Otherwise, trapping should remain on continually when the VM is in any mode that corresponds to a set "enable trapping" bit. Monochrome Support ------------------ During initialization, the VDD for VGA attempts to determine if a secondary monochrome adapter is installed and whether the system is configured to support running the VGA in monochrome modes. If the VDD determines that the VGA display should support monochrome, it traps the monochrome I/O addresses for the CRTC and status registers and treats these identically to the color I/O addresses. Display Adapter Extensions Support ---------------------------------- To support registers that exist at I/O addresses different from the standard EGA/VGA I/O ports, install the appropriate I/O handlers in the VDD_IO_Init routine of VDDTIO and enable/disable trapping in the VDD_IO_SetTrap routine of the same module. If the extensions exist at the same addresses, modify the existing VIOT_* routines to detect access to the extended registers and take the appropriate action (see below). I/O Handler Routines -------------------- The I/O trap handlers must always accept and receive data as if the application were accessing the real hardware. In some cases, it is not necessary to handle specific I/O either because the I/O is only done during machine boot or the particular feature enabled by the operation is not normally used and is not supported. The I/O handler has the option to specifically warn the user when an application attempts to use an unsupported feature. When the driver handles I/O, the data needed to simulate functionality or to restore the VM's state to the physical display should be stored in the portion of the Control Block reserved for the VDD. If the display is owned by the VM, the driver also performs the physical I/O, with a few exceptions. One example: The driver simulates the VRTC bit in the status register to allow existing applications to work properly in the preemptive multitasking environment. If the VM is running in physical memory but does not own the display, merge its output with that of the display owner to send to the physical I/O port. If the VM is running entirely simulated, the routine may need to remap the memory if the I/O affects the virtual display's memory state. Note that the remapping is best delayed until the driver makes an actual access to the memory (until then, disable access to the video memory addresses). Note that because of register locking and/or translation, some display adapters require that multiple copies of the registers be kept to restore the state of the physical display, and some extra logic is required to determine which of these states is to be returned on input. Additional query words: 3.00 3.10 3.11 DDKDISPLAY EGA VGA WIN386 ====================================================================== Keywords : Technology : kbAudDeveloper kbWin3xSearch kbWinDDKSearch kbWinDDK300 kbWinDDK310 kbWinDDK311 Version : :3.0,3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.