DOCUMENT:Q154409 11-JUN-2002 [crossnet] TITLE :Setting WINS Clients Refresh Intervals to Occur Infrequently PRODUCT :Windows for Workgroups and Windows NT Networking Issues PROD/VER::3.5,3.51,4.0 OPER/SYS: KEYWORDS:kbnetwork ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 - Microsoft Windows for Workgroups - Microsoft TCP/IP-32 for Windows for Workgroups - Microsoft Windows 95 ------------------------------------------------------------------------------- IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base: Q256986 Description of the Microsoft Windows Registry SUMMARY ======= If you want to set a Windows Internet Naming Service (WINS) client to refresh its names with the WINS server infrequently, you must make a change in the registry (or System.ini file if you are using Windows for Workgroups 3.11). MORE INFORMATION ================ In environments with Dial-on-Demand routers, frequent name refreshes may create undesirable router traffic that can be limited by adding a static entry for the client in WINS. When a WINS client is started, it sends its name registrations to the WINS server. If the WINS server is across a Dial-on-Demand router, the router dials. The WINS client then sends a refresh request of its name to the WINS server. The first attempt to send the refresh request occurs when one-eighth of its InitialRefreshTimeout interval expires. By default, the value for the InitialRefreshTimeout is 960,000 ms (or 16 minutes), and one-eighth of that value is 2 minutes. The minimum value for this registry entry is 960,000 ms, so it is impossible to prevent the refresh request from occurring. Setting the value in the registry to 0xffffffff defines the interval for the refresh request, or one-eighth of the IntitialRefreshTimeout, to approximately 50 days. Once a WINS server receives the refresh request from the WINS client across the router, the WINS server returns a refresh response. The server's refresh response includes the client's renewal interval, which the client uses to determine the wait time before its next refresh request. This is determined by one-eighth of the renewal interval (which by default is 96 hours, so the next refresh will occur in 12 hours). You can change the value if the InitialRefreshTimeout setting according to your needs. For more information on where you can change this parameter, see the section below for your version of Windows. Windows NT ---------- WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. For computers running Windows NT Server or Windows NT Workstation, you can change the registry entry for InitialRefreshTimeout. It is located in the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBt\Parameters InitialRefreshT.O. REG_DWORD Range : 960,000 to 0xFFFFFFF milliseconds Default: 960,000 (16 minutes) This parameter specifies the initial refresh timeout used by NetBIOS over TCP/IP (NBT) during name registration. NBT tries to contact the WINS servers at one-eighth of this time interval when it first registers names. When it receives a successful registration response, that response contains the new refresh interval to use. Windows for Workgroups 3.11 --------------------------- For computers running Windows for Workgroups 3.11, you can add the following line to the [NBT] section of the System.ini file: InitialRefreshT.O.= Windows 95 ---------- For computers running Windows 95, you can change the registry entry for InitialRefreshTimeout. It is located in the following registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP InitialRefreshTimeout: REG_DWORD: milliseconds Additional query words: networking dun ras ====================================================================== Keywords : kbnetwork Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search kbAudDeveloper kbWin95search kbTCPIPSearch kbWFWSearch kbZNotKeyword3 Version : :3.5,3.51,4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.