Adaptec 1542C SCSI Adapter Card Hangs During Startup

Last reviewed: May 9, 1997
Article ID: Q105091

The information in this article applies to:
  • Microsoft Windows NT operating system version 3.1
  • Microsoft Windows NT Advanced Server version 3.1

SYMPTOMS

If you have an Adaptec 1542C SCSI adapter card installed, Windows NT hangs when running NTDetect or AutoCheck, and MS-DOS hangs while processing the CONFIG.SYS or AUTOEXEC.BAT files.

RESOLUTION

A modification by Adaptec is required to resolve this problem. If your Adaptec board has not been modified, you will need to contact Adaptec to have the 1542C board altered.

To determine if the Adaptec 1542C has been modified, pull the card and look for one of the following:

  • On the solder side of the card toward the external SCSI connector, if there are jumper wires, the card has been modified.
  • The label on the VLSI chip has three sets of numbers. If the middle row of numbers has a "D" suffix, the card has been modified.

For more information, please call Adaptec Technical Support at (800) 959-7274.

The Adaptec products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.


Additional query words: prodnt
Keywords : kbhw nthw
Version : 3.1
Platform : WINDOWS


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: May 9, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.