DOCUMENT:Q152456 08-AUG-2001 [winnt] TITLE :Automating SMC Adapter Setup PRODUCT :Microsoft Windows NT PROD/VER:3.5 3.51 OPER/SYS: KEYWORDS:kbsetup ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation versions 3.5, 3.51 - Microsoft Windows NT Server versions 3.5, 3.51 - MSPRESS Microsoft Windows NT Resource Kit, versions 3.5, 3.51 ------------------------------------------------------------------------------- SYMPTOMS ======== Unattended Setup and Computer Profile Setup (CPS) fail to install the SMC 9332 EtherPower 10/100 PCI Fast Ethernet Adapter. Following the instructions on "Profiling systems with OEM netcards" in the Cpsread.txt file in the Windows NT version 3.5 Resource Kit or the Cps.hlp file in the Windows NT version 3.51 Resource Kit is not sufficient. CAUSE ===== The Oemsetup.inf file for the SMC 9332 EtherPower10/100 PCI Fast Ethernet Adapter is not designed to work with Unattended Setup or Computer Profile Setup. RESOLUTION ========== To resolve this problem, follow the instructions for the kind of Setup you are doing, either CPS or Unattended. Computer Profile Setup ---------------------- 1. Before you run Uplodprf.exe, modify Cps.ini as described in the following note, which is included in both the Cpsread.txt in the Windows NT 3.5 Resource Kit and the Cps.hlp in the Windows NT 3.51 Resource Kit: [Registry] FindInstalledServicesAt = SOFTWARE\Microsoft,SOFTWARE\StandardMicrosystemsCorporation 2. Run Uplodprf.exe. 3. After running Uplodprf.exe, on the Distribution System back up %Systemroot%\System32\Ntlanman.inf to Ntlanman.bak. WARNING: Modification of Setup files can cause serious, system-wide problems before and after Setup and may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the modification of Setup files can be solved. Make Setup file modifications at your own risk. 4. On the Distribution System modify %Systemroot%\System32\Ntlanman.inf: ; Original Line below with exclamation point ; set AdapterSrcDir = $(OEMNetDrive) ; Corrected syntax with exclamation point set AdapterSrcDir = $(!OEMNetDrive) 5. On the Distribution system, modify %Systemroot%\System32\Defaults.inf: [NetworkAdapterData] !AutoNetOption = SMC9332 !OEMNetOption = YES !OEMNetDrive = C:\SMC\ !OEMNetInfFile = C:\SMC\oemsetup.inf 6. On Distribution System, disable the Read-Only attribute on %Systemroot%\System32\Oemnad0.inf. 7. On the Target system, create a directory called SMC on the partition where Windows NT will be installed. 8. Copy the OEM files to the SMC directory created in the previous step. These OEM files may be located on the Windows NT compact disc in the \DRVLIB\NETCARD directory or may be available from the network card manufacturer. 9. Modify \SMC\Oemsetup.inf to avoid dialog boxes, as shown below in steps a and b. WARNING: Modification of Setup files can cause serious, system-wide problems before and after Setup and may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the modification of Setup files can be solved. Make Setup file modifications at your own risk. a. First OEMSETUP.INF modification: installadapter = + ;; The below IF statement was added to avoid setup dialogs during CPS/Unattended Setup ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" goto installproduct endif ;; The above IF statement was added to avoid setup dialogs during CPS/Unattended Setup b. Second Oemsetup.inf modification: The code fragment below can be found at the end of the installproduct section. ;; Below lines added to retrieve netcard parameters from answer file during CPS/Unattended Setup ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey) endif ;; Above lines added to retrieve netcard parameters from answer file during CPS/Unattended Setup CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) CloseRegKey $(HardParameterKey) EndForListDo EndWait goto successful updateparameters =+ NOTE: Similar modifications should work for the SMC 8432 and 8434 Ethernet adapters. 10. Run Winntp.exe For more information, please see the following articles in the Microsoft Knowledge Base: Q143134OEMSETUP.INF Modifications for Automated Windows NT Setup Q139897Automating Intel EtherExpress Pro Setup You can also refer to the "Programmer's Guide" included in the Windows NT Device Driver Kit (DDK), or contact Microsoft Consulting Services or a Microsoft Solution Provider. Microsoft Product Support Services, Corporate Network Systems, does not support the modification of Oemsetup.inf files. It is recommended that you perform a test run of Winntp.exe to verify whether your Oemsetup.inf file supports Unattended or Computer Profile Setup. Unattended Setup ---------------- 1. Copy the \I386 directory from the Windows NT compact disc to your hard disk drive. 2. Expand I386\Ntlanman.in_ to Ntlanman.inf. The Expand.exe file is located in the %SystemRoot%\System32 directory. 3. Rename I386\Ntlanman.in_ to Ntlanman.bk_ WARNING: Modification of Setup files can cause serious, system-wide problems before and after Setup and may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the modification of Setup files can be solved. Make Setup file modifications at your own risk. 4. Modify I386\Ntlanman.inf as follows: ; Original Line below with exclamation point ; set AdapterSrcDir = $(OEMNetDrive) ; Corrected syntax with exclamation point set AdapterSrcDir = $(!OEMNetDrive) NOTE: It is not necessary to rename Ntlanman.inf to Ntlanman.in_. Windows NT Setup does not require the file to be compressed or named with an .in_ extension. 5. Modify the [NetworkAdapterData] section in your "Answer File" as follows: [NetworkAdapterData] !AutoNetOption = SMC9332 !OEMNetOption = YES !OEMNetDrive = C:\SMC\ !OEMNetInfFile = C:\SMC\oemsetup.inf 6. Create a directory called SMC on the partition to which Windows NT will be installed. 7. Copy the OEM files to the SMC directory created in the previous step. These OEM files may be located on the Windows NT compact disc in the \DRVLIB\NETCARD directory or may be available from the network card manufacturer. 8. Modify \SMC\Oemsetup.inf to avoid dialog boxes as shown in Step 9 in the above Computer Profile Setup section. 9. Run Unattended Setup. STATUS ====== Microsoft has confirmed this to be a problem in Windows NT version 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: automate ====================================================================== Keywords : kbsetup Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS350 kbMSPressSearch kbWinNTS351search kbWinNTS350search kbZNotKeyword6 kbZNotKeyword2 kbZNotKeyword5 Version : 3.5 3.51 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.