DOCUMENT:Q153719 15-AUG-2001 [winnt] TITLE :How to Re-Sync PDC/BDC Trust After Event IDs 3210 and 7023 PRODUCT :Microsoft Windows NT PROD/VER::3.5,3.51,4.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== After a Windows NT backup domain controller (BDC) has been offline for some time, it may fall out of synchronization with the primary domain controller (PDC). When you attempt to bring the BDC back online, you may get the following errors in the BDC's Event Viewer: Event ID: 3210 Source: Netlogon Type: Error Description: Failed to authenticate with , a Windows NT domain controller for domain . Data word: c0000022 Event ID: 7023 Source: Service Control Manager Type: Error Description: Netlogon service terminated with the following error message: Access Denied. This is very likely to occur if a BDC is restored from a backup that is more than a few days old or if the BDC is offline for more than a few days. CAUSE ===== Domain controllers maintain a password-protected channel between each other. When a BDC is brought into a domain, the PDC gives the BDC the current password to use when connecting to the PDC for authentication, account database replication, and other system activities. This password changes automatically on a regular basis. If the BDC is offline when the password changes, or if a BDC is restored from a backup that has an old password, the BDC will not be able to authenticate with the PDC, and Netlogon will fail. RESOLUTION ========== In the simplest case, all that has happened is that the domain password has changed. To resolve the behavior, do the following: 1. Start the BDC, and open Server Manager 2. Select the BDC's name, and select Synchronize with Primary Domain Controller. If this procedure is successful, you will get a message that the LSA Database has been updated and Netlogon will start automatically. No other action is necessary. However, if synchronizing with the PDC does not work on the first attempt, try carrying out the same command again. Often, a second attempt will succeed. However, if the BDC will not synchronize and Netlogon fails to start after three attempts, you should create a new machine account for the BDC. These instructions are taken from a related article, Q137987: 1. Using Server Manager, create a new computer name. 2. Synchronize entire domain (check another BDC's event viewer to see if it synchronized). 3. At the problem BDC, use the Network tool in Control Panel to change the name to the new name created in Step 1. 4. Shut down the BDC, restart, and log on to Windows NT. Note any error messages. You must logon to the domain the BDC belongs to, not a trusted domain. 5. Using Server Manager, synchronize the entire domain. 6. From the PDC, delete the old computer name(use Server Manager). 7. Synchronize the entire domain, using Server Manager. 8. Make sure the old BDC name has been deleted in Server Manager before proceeding. 9. After the old BDC name is gone from Server Manager, re-create it. 10. Synchronize the entire domain, using Server Manager. 11. At the problem BDC, change computer name to the old name created in step 9, using the Network tool in Control Panel. 12. Shut down the BDC, restart, and log on to the domain. Note any error messages. 13. Synchronize entire domain. At this point the BDC should be synchronized with the PDC, netlogon should be running, and the accounts database should be up to date. Related Articles: For additional information on authentication issues specific to NWLink, please see the following article in the Microsoft Knowledge Base: Q126752DCs Fail to Synchronize or Validate Users Over NWLINK For additional information on authentication issues when trying to net view, please see the following article in the Microsoft Knowledge Base: Q137987NET VIEW May Cause Semaphore Time Out and Event ID 3210 For additional information on authentication from the PDC's point of view, please see the following article in the Microsoft Knowledge Base: Q142869Event ID 3210 & 3722 Appear When Synchronizing Entire Domain Additional query words: resync resynchronization failure ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search Version : :3.5,3.51,4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.