DOCUMENT:Q135463 08-AUG-2001 [winnt] TITLE :IPINFO.INF Values Ignored During Setup PRODUCT :Microsoft Windows NT PROD/VER:3.50 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation version 3.5 - Microsoft Windows NT Server version 3.5 ------------------------------------------------------------------------------- SYMPTOMS ======== You configure IPINFO.INF with TCP/IP address and subnet mask values, but Setup ignores them and you have to enter them manually in the TCP/IP configuration dialog box after TCP/IP is installed. This problem occurs when you install TCP/IP using the unattended setup feature of Windows NT Setup or Computer Profile Setup (CPS) and you set the [DefaultIPInfo] section of IPINFO.INF to include values for DefaultGateway, Number of IP Addresses, IP Address, and Subnet Mask. NOTE: The IPINFO.INF file allows network administrators to provide smart defaults for TCP/IP configuration parameters. By modifying this template file, an administrator can distribute the Windows NT TCP/IP software over the network or on floppy disks to users with some smart default configuration parameters. Users may modify these values when installing TCP/IP, however, the default values are automatically filled in for them. CAUSE ===== The OEMNXPTC.INF does not read the IPINFO.INF file correctly. RESOLUTION ========== To resolve this problem, upgrade to Windows NT version 3.51. To work around this problem: - If you are attempting to automate TCP/IP installation during Windows NT 3.5 Setup, copy the OEMNXPTC.INF file from Windows NT 3.51 to your Windows NT 3.5 I386 directory. If you do not have Windows NT 3.51, contact Microsoft Product Support Services to obtain OEMNXPTC.INF. - If you are attempting to install TCP/IP after Windows NT 3.5 is installed, copy the OEMNXPTC.INF file from Windows NT 3.51 to the %SystemRoot%\SYSTEM32 directory of the Windows NT 3.5 installation. For additional information, please see the following article in the Microsoft Knowledge Base: ARTICLE-ID: Q133337 TITLE : Automating Setup to Set Up TCP/IP for Static Addressing Fails Additional query words: prodnt ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNTWsearch kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTSsearch kbWinNTS350 kbWinNTS350search Version : 3.50 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.