DOCUMENT:Q102724 14-DEC-2000 [utilities] TITLE :Remote Access 1.1a COM1 and COM2 Only PRODUCT :Microsoft Programming Utilities PROD/VER::1.1a OPER/SYS: KEYWORDS:kbnetwork ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Remote Access Service, version 1.1a ------------------------------------------------------------------------------- SUMMARY ======= Remote Access client software for MS-DOS and Microsoft Windows for Workgroups 3.1 only supports COM1 and COM2. Modems attached to COM3 and above will not be recognized. If you are installing an internal modem, make sure that you configure it for COM 1-2. This may mean that you need to disable or move one of your existing COM 1-2 ports. This information applies to the following Remote Access client packages: - RAS 1.0 - RAS 1.1 - RAS 1.1a These clients run on the following operating systems: - MS-DOS\LAN Manager 2.x - Windows 3.1\LAN Manager 2.x - Windows for Workgroups 3.1 NOTE: This does not apply to RAS on Microsoft OS/2 1.3x and Windows NT. Microsoft OS/2 supports up to 16 COM ports. Windows NT supports 1 dial-in port and 64 dial-out ports. Advanced Server for Windows NT supports 64 ports for both dial-in and dial-out. Additional query words: wfw wfwg prodnt dialin dialout dial out in ====================================================================== Keywords : kbnetwork Technology : kbAudDeveloper kbRASSearch kbRAS110a Version : :1.1a ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.