DOCUMENT:Q147711  14-FEB-2002  [winnt]
TITLE   :Scheduled RASDIAL Fails To Connect to Windows NT RAS Server
PRODUCT :Microsoft Windows NT
PROD/VER:3.5 3.51 4.0
OPER/SYS:
KEYWORDS:kbnetwork

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 
 - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you use the Windows NT Scheduler Service and schedule RASDIAL.EXE to
automatically connect to a Windows NT Remote Access Service (RAS) server, the
following symptoms occur if you do not specify a user account for the RASDIAL
command:

 - The Windows NT RAS server disconnects the Windows NT RAS client during
   authentication.

 - If you schedule the RASDIAL command to run interactively (with the
   /INTERACTIVE switch) in the MS-DOS Command Prompt (CMD.EXE), the CMD window
   stops responding (hangs).

 - The system that scheduled the RASDIAL command may become unstable and you may
   not be able to start new applications.

CAUSE
=====

When you do not specify a user account in RASDIAL, RASDIAL uses the current user
name and password. By default, the Scheduler service logs on with the System
account. Therefore, if you do not change the "Log On As" account for the
Scheduler service and you do not specify a user name and password on the RASDIAL
command line, the scheduled RASDIAL command uses the System account when it
attempts to connect to the Windows NT RAS server. If the System account is used,
the symptoms mentioned above occurs.

RESOLUTION
==========

To correct this problem, do one of the following:

 - Enter a user name and password as parameters on the RASDIAL command line in
   the following format:

   RASDIAL <Entry Name> <User Name> <Password>

   The user name you specify must have RAS dial-in permission on the RAS server.

   -or-

 - Change the "Log On As" account for the Scheduler service to an account other
   than the System account. The account that you select must have RAS dial-in
   permission on the Windows NT RAS server.

Additional query words: prodnt
======================================================================
Keywords          : kbnetwork 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search
Version           : 3.5 3.51 4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.