DOCUMENT:Q163726 08-AUG-2001 [winnt] TITLE :STOP 0x0000001E with DPT PM2124 SCSI Adapter and Volume Set PRODUCT :Microsoft Windows NT PROD/VER:WinNT:3.51 OPER/SYS: KEYWORDS:kb3rdparty kbhw kbHardware ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 3.51 - Microsoft Windows NT Workstation version 3.51 ------------------------------------------------------------------------------- SYMPTOMS ======== After you create a volume set, the following error message is displayed on the subsequent restart of the computer: STOP 0x0000001E (0xC0000005, 0x80115B60, 0x0000001, 0x0000004) KMODE_EXCEPTION_NOT_HANDLED *** address 80115B60 has base at 80100000 - NTOSKRNL.EXE CAUSE ===== If a volume set spanning 2 or more volumes is created when a DPT PM2124 no cache PCI SCSI controller, this error may occur. WORKAROUND ========== Obtain the latest Windows NT 3.51 driver for this card from DPT. At the time of this article, the file NTMGR1J.ZIP can be obtained at DPT's Web site: http://www.dpt.com/drivers.html#NT) The driver in this file, DPT_SCSI.SYS is version 1.Ka dated 7-20-96. STATUS ====== Microsoft has confirmed this to be a problem in Windows NT version 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. MORE INFORMATION ================ The products mentioned here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. ====================================================================== Keywords : kb3rdparty kbhw kbHardware Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS351search Version : WinNT:3.51 Issue type : kbbug ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.