DOCUMENT:Q147909 06-AUG-2002 [winnt] TITLE :Troubleshooting MacVolume Creation Errors PRODUCT :Microsoft Windows NT PROD/VER::2000,3.51,4.0 OPER/SYS: KEYWORDS:kbinterop ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server versions 3.51, 4.0 - Microsoft Windows 2000 Server ------------------------------------------------------------------------------- SYMPTOMS ======== When you use Services for Macintosh (SFM) for Windows NT, there may be occasional issues creating or re-creating a MacVolume. The following error message may appear when you create the volume: The Device attached to the system is not functioning In the event log, the following error message is displayed: Event ID: 12035 Description: Volume information for could not be loaded. Setting defaults. RESOLUTION ========== The following methods should be tried individually and in sequential order. Before each step, stop Services for Macintosh (SFM) in the Services tool in Control Panel. Before you continue with the next step, restart SFM and test for success by attempting to re-create the volume on the preferred directory. Method 1 -------- Run Chkdsk.exe with the /f and /r command-line switches on the partition that is generating the error message. Running Chkdsk.exe usually requires restarting the server. If the volume is large in size, it may take several minutes to several hours to complete and the server may not be available during this time. If time is a concern and you have a large volume, skip this method and continue to method 2. At some point when time permits, run Chkdsk.exe on the server. Method 2 -------- Create a temporary Macintosh volume on a new partition. Copy all files and folders from the original Macintosh volume into the temporary volume on the new partition. NOTE: Existing Macintosh NTFS file system (NTFS) permissions are not retained. You can use Scopy.exe, which can be found in the Windows NT Resource Kit, to retain all file and folder permissions if necessary. Remove the original Macintosh volume from MacFile. Delete the original folder, and then re-create the volume using the same volume name. If this is successful, move all files and folders from the temporary volume back into the re-created volume. Method 3 -------- Create a temporary Macintosh volume. Move all files and folders from the original Macintosh volume into the temporary volume on the same drive. NOTE: This ensures that permissions are retained. Remove the original Macintosh volume from MacFile, delete the original folder, and then re-create the volume using the same volume name. If this is successful, move all files and folders from the temporary volume back into the re-created volume. Method 4 -------- Remove the volume in question from Macfile, and then delete the Icon file and Network trash folder. These files (Hidden/System) exist in the root of the Macintosh volume (folder). Method 5 -------- If the issue exists in a volume that is part of a folder (for example, D:\Public), type the following command at a command prompt: dir > d:\public:afp_idindex If you are rebuilding a root drive share such as C:\ or D:\, type the following command at a command prompt: dir > d:\:afp_idindex NOTE: This command intentionally damages the index of the Macintosh volume. After SFM is stopped and restarted, the damage forces Windows NT to rebuild the index on that volume immediately. If an "access denied" error message occurs, the volume may be in use by opened files or the folder is being shared for personal computer access. Disable all programs and file sharing to prevent this error message. After SFM is restarted and the index is complete, an event is logged in Event Viewer. If the volume is large in size, it may take several minutes before all volumes and files are visible by the Macintosh client. Avoid stopping the SFM service at this time. The following error will appear when you corrupt the volume index: Event ID: 12042 Source: MacFile Description: Internal server information for file "\:AFP_AfpInfo" was corrupted. Setting default information. Method 6 -------- Use Disk Administrator to change the drive letter of the partition exhibiting the problem. For example, if drive D had the original Macintosh volume, change it to drive E (as long as E is not being used by another device). Restart the computer running Windows NT and attempt to create the volume. If this is successful, you can use Disk Administrator to change back to the original drive letter. NOTE: This procedure damages the NTFS data stream and forces MacFile to regenerate it. This step is only necessary if you are sharing the root of the drive. Method 7 -------- Remove all Macintosh volumes from MacFile. Remove SFM by using the Network tool in Control Panel. Do not restart the computer. Delete the Icon file and the Network trash folder from the root of the Macintosh volume. Restart the computer. Reinstall SFM and apply the necessary service packs. MORE INFORMATION ================ SFM creates an in-memory index for each Macintosh volume to optimize folder and file access for Macintosh clients. Along with the appropriate disk structures, the index is updated for certain events, such as creation or deletion of folders and files, and for all permission changes. The index, which is stored on disk in the volume header, is read when SFM is started and written right after startup and again when SFM is shutdown. Attribute changes, such as folder permissions made by processes outside of SFM, to Macintosh volumes may not be correctly reflected until SFM is stopped and restarted. For additional information about an update to SFM and index creation, click the article number below to view the article in the Microsoft Knowledge Base: Q185722 SFM Rebuilds Indexes upon Restarting of Windows NT Additional query words: mac tshoot resource fork corrupt corrupted ====================================================================== Keywords : kbinterop Technology : kbWinNTsearch kbWinNT351search kbWinNT400search kbwin2000Serv kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbwin2000ServSearch kbwin2000Search kbWinNTS351search Version : :2000,3.51,4.0 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.