DOCUMENT:Q171984 10-AUG-2001 [winnt] TITLE :Using DLC Protocol Instead of JetAdmin Utility PRODUCT :Microsoft Windows NT PROD/VER::3.5,3.51,4.0 OPER/SYS: KEYWORDS:kbhowto ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 - Microsoft File and Print Services for NetWare version 3.51 ------------------------------------------------------------------------------- SUMMARY ======= Any printer configured for use with Windows NT Server will be available for both Microsoft clients and NetWare clients (through File and Print Services for NetWare [FPNW]) when the printer is shared. Configuring a printer as a normal Windows NT printer and sharing it is much simpler than using the Jetadmin utility to configure it. MORE INFORMATION ================ To use a printer with a JetDirect card as a network printer,perform the following steps: 1. Get the media access control address of the JetDirect card. (You may want to use JetAdmin to get the media access control address in some instances.) 2. Install the DLC protocol by clicking the Protocol tab in the Control Panel Network tool. Restart your computer. 3. Click the Start button, point to Settings, and then click Printers. 4. Double-click the Add Printer icon. Accept the default setting which is "My Computer" by clicking Next. You are now in the Add Printer wizard box. 5. Click Add Port. 6. In the Available Printer Ports list, select the Hewlett-Packard Network Port, and then click New Port. 7. In the Name box, type in the print queue name. Under the Name, type in the card address if it does not appear in the list. 8. Click OK, then close. You are now at the printer Wizard box again. 9. Select the printer type, and then click next. Type in the name of the printer, and then share the printer. 10. Print a test page to verify the new drivers' status. NOTE: JetDirect is no longer supported by HP. They now use SDI (Simple Device Installation) to install network printers. For more information on this, see: http://www.hp.com/cgi-bin/cposupport/ccsearch/getdoc?doc=bpj05973 or http://www.hp.com/cposupport/networking/support_doc/bpj06765.html HP recommends a new software admin package (TCP/IP / IPX/SPX Based). For further information see: http://www.hp.com/cgi-bin/cposupport/ccsearch/getdoc?doc=bpj06723 or http://www.hp.com/cgi-bin/cposupport/ccsearch/getdoc?doc=bpj06724 Additional query words: ====================================================================== Keywords : kbhowto Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search kbServicesNetwareSearch kbFPNW351 Version : :3.5,3.51,4.0 Hardware : ALPHA x86 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.