DOCUMENT:Q128038 08-AUG-2001 [winnt] TITLE :Using Novell's ODINSUP with Network Client 3.0 TCP/IP PRODUCT :Microsoft Windows NT PROD/VER:3.0 3.5 4.0 OPER/SYS: KEYWORDS:kb3rdparty kbnetwork ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server versions 3.5, 4.0 - Microsoft Network Client for MS-DOS version 3.0 ------------------------------------------------------------------------------- SUMMARY ======= This article provides instructions on how to install the Novell ODINSUP (ODI/NDIS) driver to work with the TCP/IP protocol included with Microsoft Network Client for MS-DOS, version 3.0. This article discusses the following using the Intel EtherExpress 16 TP network card as an example: - Network Client and ODINSUP Setup Instructions - Sample PROTOCOL.INI - Sample SYSTEM.INI - Sample CONFIG.SYS - Sample AUTOEXEC.BAT - Sample NET.CFG For additional information regarding the Novell ODINSUP.COM driver, contact Novell Technical Support at (800) 638-9273. ODINSUP.COM and other Netware drivers are available on CompuServe (Go NOVLIB/NOVFILES) or on Novell's FTP server. Network Client And ODINSUP Setup Instructions --------------------------------------------- Because this configuration requires the Novell IPXODI driver, make sure you can connect to a NetWare server using the IPXODI driver and NETX.EXE or VLM. 1. From the CLIENTS\MSCLIENT\DISKS subdirectory of the Windows NT Server version 3.5 CD, copy the contents of DISK1 and DISK2 to blank floppy disks. Label the disks Disk 1 and Disk 2. 2. Run SETUP from Disk 1 to install Microsoft Network Client. 3. Specify the location of the Network Client installation and press ENTER. 4. For the adapter driver, select the ODI/NDIS support driver. 1. Enter the user name. In the next screen, verify or change the computer name, workgroup name, and domain name. 2. Change the setup options if necessary. This screen enables you to change your redirector, startup, logon and network pop-up options. 3. Select Change Network Configuration. You should see the ODI/NDIS Support Driver as your adapter name. Remove the default protocol by selecting NWLink and then choosing Remove. 4. When Setup prompts you to select a protocol, select Microsoft TCP/IP. This returns you to the Network Configuration screen. The upper box should now show the ODI/NDIS Support Driver and Microsoft TCP/IP. 5. Highlight Microsoft TCP/IP and select Change Settings. If you are using Dynamic Host Configuration Protocol (DHCP), set Disable Automatic Configuration to 0 (zero). If not, it should equal to 1. If you are not using DHCP, you need to add your IP address, subnet mask and default gateway information. Make sure that the IP addresses use a space and not a period to separate segments for any IP addresses. NOTE: If you use DHCP, you can leave your IP address at 0 0 0 0 and the other fields blank. 6. After the configuration for Network Client is complete, insert the disk with Novell's ODINSUP.COM (when requested). Setup continues to copy files from Disk 1 and may prompt you for Disk 2. 7. When Setup finishes, restart your computer. You should then be able to login to your Netware server and then logon to Microsoft Network resources. Sample PROTOCOL.INI ------------------- [network.setup] version=0x3110 netcard=odinsupmac,1,ODINSUPMAC,1 transport=tcpip,TCPIP lana0=odinsupmac,1,tcpip [TCPIP] (Setup to use DHCP) frame=Ethernet_SNAP NBSessions=6 SubNetMask0=0 0 0 0 IPAddress0=0 0 0 0 DisableDHCP=0 DriverName=TCPIP$ BINDINGS=exp16odi (Protocol should bind to the ODI MLID) LANABASE=0 [MS$EWTRBTP] RamAddress=0xD000 IOAddress=0x300 Interrupt=5 [protman] DriverName=PROTMAN$ PRIORITY=MS$NDISHLP [ODINSUPMAC] [Link Driver] data=FRAME Ethernet_802.3 data=FRAME Ethernet_802.2 data=FRAME Ethernet_II data=FRAME Ethernet_SNAP Sample SYSTEM.INI ----------------- [network] filesharing=no printsharing=no autologon=yes computername= lanroot=C:\NET username= workgroup= reconnect=yes dospophotkey=N lmlogon=0 logondomain= preferredredir=full autostart=full maxconnections=8 maxnwsess=8 [network drivers] transport=tcpdrv.dos,nemm.dos devdir=C:\NET LoadRMDrivers=yes [386enh] TimerCriticalSection=5000 UniqueDosPSP=TRUE PSPIncrement=2 [Password Lists] *Shares=C:\NET\Shares.PWL =C:\NET\.PWL Sample CONFIG.SYS ----------------- DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE NoEMS x=d000-d3ff dos=high,umb Files=30 LASTDRIVE=e BUFFERS=10,0 SHELL=C:\DOS\COMMAND.COM C:\DOS\ /e:512 /p DEVICE=C:\NET\ifshlp.sys STACKS=9,256 (if using Windows) Sample AUTOEXEC.BAT ------------------- PATH C:\NET;C:\WINDOWS;C:\DOS;C:\ SET TEMP=C:\WINDOWS\TEMP C:\NET\net initialize c:\NOVELL\lsl.com c:\NOVELL\exp16odi (This is the ODI MAC driver) C:\NET\odinsup C:\NET\netbind.com C:\NET\umb.com C:\NET\tcptsr.exe C:\NET\tinyrfc.exe C:\NET\nmtsr.exe C:\NET\emsbfr.exe C:\NET\net start c:\NOVELL\ipxodi c:\NOVELL\netx (or vlm) Sample NET.CFG -------------- Preferred server= SHOWDOTS=ON PB BUFFERS 7 Link support max boards 4 max stacks 8 Link Driver exp16odi int 5 port 300 frame Ethernet_802.3 frame Ethernet_802.2 frame Ethernet_II frame Ethernet_SNAP The ODINSUP.COM and NetWare products discussed here are manufactured by Novell, Inc., a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: prodnt ====================================================================== Keywords : kb3rdparty kbnetwork Technology : kbWinNTsearch kbWinNT350search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS350 kbWinNTS350search kbAudDeveloper kbZNotKeyword kbNetworkClientSearch kbNetworkClient300DOS Version : 3.0 3.5 4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.