DOCUMENT:Q132005 06-NOV-1999 [win16sdk] TITLE :DOCERR: AllocSelector & FreeSelector Documentation Incomplete PRODUCT :Microsoft Windows Software Development Kit PROD/VER:WINDOWS:3.1 OPER/SYS: KEYWORDS:_IK kbdocerr kb16bitonly ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows Software Development Kit (SDK) 3.1 ------------------------------------------------------------------------------- SUMMARY ======= The documentation in the Windows SDK for the AllocSelector and FreeSelector functions does not mention that they can allocate and free multiple selectors. Each function uses the limit (length) of the selector passed to it to determine how many selectors to allocate or free. This article describes how AllocSelector allocates one or more selectors and how FreeSelector frees selectors. It also describes what you must know to use these two functions correctly. The documentation should include all the information given in this article. MORE INFORMATION ================ AllocSelector(UINT uSelector) ----------------------------- AllocSelector(UINT uSelector) allocates a new selector or array of tiled selectors and copies the base address, limit (length), and access rights of uSelector to the new selector(s). If the limit of uSelector is less than or equal to 64K, a single selector is allocated. If the limit of uSelector is larger than 64K, an array of tiled selectors is allocated such that each selector points to a 64K portion of the limit of uSelector. If uSelector is NULL, AllocSelector allocates a single, completely uninitialized selector. The selector cannot be used until its base address, limit (length), and access rights have been set. To set the access rights of an unitialized selector, you must call the DOS Protected Mode Interface (DPMI) Set Descriptor Access Rights function (0x09). Furthermore, you must set the selector's table bit and privilege bits by using a bitwise-OR mask of 0x0007 to set the lowest-order three bits of the selector. You should copy an existing selector instead of allocating an uninitialized selector because it is easier to allow AllocSelector set the newly created selector's access control bits. After creating a copy of an existing selector, use SetSelectorLimit and SetSelectorBase to make the copy point to the desired location. Selectors allocated by AllocSelector must be freed by FreeSelector because the system does not track or manage them automatically. FreeSelector(UINT uSelector) ---------------------------- FreeSelector(UINT uSelector) frees either a single selector or an array of tiled selectors depending on the limit of uSelector. Frees one selector for each 64K portion of the limit of uSelector. The selector or array of tiled selectors being freed must have been allocated previously by AllocSelector. Furthermore, the limit of uSelector must be the same as the selector used as a parameter in the call to AllocSelector. Example Array of Tiled Selectors -------------------------------- An example array of tiled selectors looks like this (assuming that the selector passed to AllocSelector has a limit of 256K): Sel 1 Sel 2 Sel 3 Sel 4 0 64K 128K 192K 256K +----------+----------+----------+----------+ | | | | | +----------+----------+----------+----------+ | | | |--------->| (Limit = 64K) | | |-------------------->| (Limit = 128K) | |------------------------------->| (Limit = 192K) |------------------------------------------>| (Limit = 256K) Notice that each successive selector's base address starts 64K from the previous selector's base address and has a limit that is 64K less than the previous selector. What really makes these selectors tiled is that they are contiguous in the local descriptor table (LDT). For example, if Sel 1 has a value of 0x97, then Sel 2 will be 0x9F, Sel 3 will be 0xA7, and Sel 4 will be 0xAF. Only Sel 1 is used to create a huge pointer to the block. As you increment through the block, the compiler generates the correct code to switch from Sel 1 to Sel 2 to Sel 3 to Sel 4 automatically. The code listed in the "Code Sample Two" section of this article demonstrates this. Code Sample One --------------- This example shows how to allocate exactly one data selector. Code segments in 16-bit code are always less than 64K, so you can ensure that you don't allocate multiple selectors by allocating a copy of a code selector and converting it into a data selector: UINT codeSelector, dataSelector; _asm { mov ax, cs mov codeSelector, ax } dataSelector = AllocSelector(codeSelector); if (!dataSelector) return NULL; // Change dataSelector from a code selector into a data selector if (PrestoChangoSelector(codeSelector, dataSelector)) { // Set the desired base address and limit SetSelectorBase(dataSelector, dwLinearBase); DPMISetSelectorLimit(dataSelector, dwLimit); } else { // If you get here, you couldn't change dataSelector so you need // to free it because you can't use it as a code selector FreeSelector(dataSelector); return NULL; } // You now have a single data selector. Use it, and then free it by // calling FreeSelector. Code Sample Two --------------- This example shows how to automatically allocate an array of tiled selectors that points to a specified region of memory, and obtain a huge pointer from the selector array: // The application creates, uses, and frees a huge pointer here char __huge * hpMem; hpMem = CreateHugePointer (dwBaseAddress, dwLength); // hpMem now points to a region of pre-allocated memory, such // as a memory-mapped hardware device's buffer. Use it as you // would any pointer. FreeHugePointer (hpMem); // The following three functions show how to allocate an array // of tiled selectors that point to a specified region of memory. /*-------------------------------------------------------------- This function creates a huge pointer with the proper number of selectors to access physical memory. The huge pointer may be used by C or C++ code. dwLinearBase is a 32-bit linear address, and dwLength is the number of bytes that the huge pointer will be able to access. This function returns the huge pointer if it succeeds, or it returns NULL if it fails. --------------------------------------------------------------*/ void __huge * CreateHugePointer (DWORD dwLinearBase, DWORD dwLength) { WORD tempSelector = NULL; WORD codeSelector = NULL; WORD dataSelector = NULL; DWORD dwLimit; /* A segment's limit is defined as the last accessible offset in the segment. Because the limit is the last accessible offset, it is the desired length of the segment minus 1. For example, if you want a 64K segment, then you need a limit of 0xFFFF, not 0x10000, because the segment contains byte offsets 0 to 0xFFFF. Note that a segment with a limit of 0 is actually a single byte in length. Thus, this function considers a length of zero invalid. */ if (dwLength == 0) return NULL; dwLimit = dwLength - 1; /* Allocate a single temporary selector by making a copy of the code segment selector and converting the copy to a data selector. Code segments are always less than or equal to 64K in length, so you are guaranteed to get a single temporary selector and be sure to free a single selector. Once you have the temporary selector, set its base address and limit to the desired values, which may be larger than 64K. Because the memory must be accessed by 16-bit code, you must allocate an array of tiled selectors. The temporary selector is used to force AllocSelector to allocate an array of the proper number of tiled selectors, each with the proper base and limit. Then you can free the single temporary selector. If you fail anywhere along the way, clean up whatever has been done, and return NULL. */ _asm { mov ax, cs mov codeSelector, ax } tempSelector = AllocSelector (codeSelector); if (!tempSelector) return NULL; /* If you can successfully change the tempSelector into a data selector, set its base address and limit to the desired base and limit, and then allocate the real selector array. Otherwise, prepare to return NULL. SetSelectorLimit does not handle the granularity bit of selectors properly, which limits its usefulness only to ranges of addresses less than 1MB in length. This function calls DPMISetSelectorLimit, a function defined below, to overcome this limitation and allow you to create arrays of tiled selectors that can access more than 1MB. */ if (PrestoChangoSelector (codeSelector, tempSelector)) { SetSelectorBase(tempSelector, dwLinearBase); DPMISetSelectorLimit(tempSelector, dwLimit); dataSelector = AllocSelector(tempSelector); } else dataSelector = NULL; // Clean up temp selector DPMISetSelectorLimit(tempSelector, 0L); FreeSelector(tempSelector); // dataSelector will be NULL if it could not be allocated // successfully, making this function return NULL. return (void __huge *)MAKELONG(0, dataSelector); } /*-------------------------------------------------------------- This function frees pointers allocated by CreateHugePointer. It correctly frees all tiled selectors created to access the block of physical memory. It is very important that you call this on all pointers created by CreateHugePointer and that you do not call this function on pointers allocated by any way other than using CreateHugePointer. --------------------------------------------------------------*/ void FreeHugePointer (void __huge * hPtr) { if (hPtr) FreeSelector (HIWORD(hPtr)); } /*-------------------------------------------------------------- This function sets the limit of a selector using DPMI Function 0008h (Set Segment Limit). This function is necessary if the segment size is greater than 1 MB because the Windows SetSelectorLimit() API function does not correctly set selector limits greater than 1 MB. Segments that are larger than 1MB are actually page granular, meaning that in the descriptor, the limit field is actually stored as the number of 4K pages rather than bytes. When you specify a limit greater than 1MB, this function rounds it up to the nearest page boundary. No matter the size of the segment, this function always accepts selector limits in number of bytes, never pages. The conversion between bytes and pages is handled internally. Note that this function takes a segment limit, which is one less than the number of bytes in the segment. --------------------------------------------------------------*/ BOOL DPMISetSelectorLimit (UINT selector, DWORD dwLimit) { BOOL bRetVal=TRUE; // If the limit is >= 1MB, we need to make the limit a mulitple // of the page size or DPMISetSelectorLimit will fail. if( dwLimit >= 0x100000 ) dwLimit |= 0x0FFF; __asm { mov ax, 0008h mov bx, selector mov cx, word ptr [dwLimit+2] mov dx, word ptr [dwLimit] int 31h jnc success mov bRetVal, FALSE success: } return bRetVal; } Four Caveats to Keep in Mind ---------------------------- Keep the following in mind when using the suggestions in this article: - Allocating selectors does not actually allocate any memory. It merely creates a pointer that can be used to access existing memory (memory previously allocated or provided by a memory-mapped hardware device). Do not confuse allocating selectors with allocating memory. - Selectors that alias (point to) a memory block allocated by Windows are not updated if the memory block is moved. To ensure that the memory block is not moved, call GlobalFix on it before creating a selector that aliases it. However, if the allocated selector points to memory provided by a hardware device, there is no need to call GlobalFix because the device's memory was not allocated by Windows. - The Windows memory manager does not keep track of which task allocated selectors with these functions, so you must ensure that the task frees them correctly. In particular, make sure it does not free more or fewer selectors than it allocated. The sample code in this article demonstrates the proper way to allocate and free selectors with these functions. - Allocating large numbers of selectors is discouraged because selectors are a limited resource. Additional query words: ====================================================================== Keywords : _IK kbdocerr kb16bitonly Technology : kbAudDeveloper kbWin3xSearch kbSDKSearch kbWinSDKSearch kbWinSDK310 Version : WINDOWS:3.1 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.