The information in this article applies to:
- Microsoft SGML Author for Word, version 1.0, 1.1, 1.2
- Microsoft Word for Windows, versions 6.x
- Microsoft Word for Windows 95, versions 7.x
- Microsoft Word 97 for Windows
SUMMARY
This article describes what is required for an installation of Microsoft
SGML Author for Word.
MORE INFORMATION
The following requirements are necessary for installing and running SGML
Author for Word:
Version 1.20
- Microsoft Word for Windows 95, version 7.x
- Microsoft Word for Windows 97, Service Release 1
- 8 MB of memory (Windows 95)
- 14 MB of memory (Windows NT Workstation)
- PC using an 80486 or greater microprocessor.
- Microsoft Windows 95 or
Microsoft Windows NT Workstation, version 3.51 or later.
- A hard drive with 10 MB of free disk space. A complete installation
of SGML Author requires 10 MB of hard disk space. A converter-only
installation requires 1.5 MB of hard disk space for the converter and
its supporting files.
- CD-ROM drive
- VGA or higher-resolution video adapter (SVGA 256-color recommended)
- Microsoft Mouse or compatible pointing device
Version 1.10
- Microsoft Word for Windows 95, version 7.0, 7.0a.
- 8 MB of available RAM.
- PC using an 80486 or greater microprocessor.
- Microsoft Windows 95 (will not run on earlier versions of Windows) or
Microsoft Windows NT Workstation, version 3.51.
- A hard drive with 10 MB of free disk space. A complete installation
of SGML Author requires 10 MB of hard disk space. A converter-only
installation requires 1.5 MB of hard disk space for the converter and
its supporting files.
- CD-ROM drive
- VGA or higher-resolution video adapter (SVGA 256-color recommended)
- Microsoft Mouse or compatible pointing device
Version 1.00
- Microsoft Word for Windows 6.0, 6.0a or 6.0c.
- 6 MB of available RAM (8 MB recommended).
- PC using an 80386 (25 MHz) or greater microprocessor.
- Microsoft Windows version 3.1 or later, Microsoft Windows for
Workgroups version 3.1 or later, or Microsoft Windows for Pen
Computing.
- MS-DOS operating system version 3.0 or later.
- A hard drive with 16 MB of free disk space. A complete installation
of SGML Author requires 16 MB of hard disk space. A converter-only
installation requires 1.5 MB of hard disk space for the converter and
its supporting files.
- A 3.5-inch high-density floppy disk drive.
For additional information about obtaining support for Microsoft SGML
Author for Word, please see the following article in the Microsoft
Knowledge Base:
ARTICLE-ID: Q154264
TITLE : SGML Author Support Policy
For additional information about SGML Author, please see the Microsoft Web
site:
http://www.microsoft.com/word/productinfo/default.htm
NOTE: Because the Microsoft Web site is constantly updated, the site
address may change without notice. If this occurs, link to the
Microsoft home page at the following address:
http://www.microsoft.com/
REFERENCES
"Microsoft SGML Author Systems Administrator's Guide," pages 3-4
|