DOCUMENT:Q163366  14-NOV-2000  [word97]
TITLE   :WD97: Can't Type Text Across Entire Label Using DeskJet 500
PRODUCT :Word 97 for Windows
PROD/VER:WINDOWS:97
OPER/SYS:
KEYWORDS:kbualink97 word97 kblayout

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Word 97 for Windows 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you create a sheet of labels, you may find that you cannot type all the way
across the label. It will appear as though there is about half an inch of white
space on each side, between the text and the side of the label.

CAUSE
=====

The problem occurs when you are using the Windows 95 printer driver for the HP
DeskJet 500 or 500C version 6.5.8 that ships with Windows 95.

WORKAROUND
==========

Use one of the following methods to workaround the problem:

Method 1: Use a Different Printer Driver
----------------------------------------

Use a different printer driver if possible. This problem is specific to the HP
DeskJet driver for the 500 and 500C printers.

Method 2: Correct the Indent
----------------------------

Correct the indent by following these steps:

1. Create the sheet of labels or the mail merge main document.

2. On the Edit menu, click Select All.

3. On the Format menu, click Paragraph.

4. In the Indentation Left box, type ".07" (without the quotation marks).

5. In the Indentation Right box, type ".07" (without the quotation marks).

6. Click OK.

The indents should be corrected, and you should be able to type more text in the
label.

NOTE: If you work with the same sheet of labels all the time, you may want to
create a label document, correct it using the steps above, and then save it as a
template. From there, you can create your new sheets of labels using the new
template and avoid having to correct the indents for the new sheets of labels.

STATUS
======

Microsoft has confirmed this to be a problem in Microsoft Word version 97.

MORE INFORMATION
================

When you are using the DeskJet 500 or 500C printer driver, the label feature
creates a sheet of labels with a .57 inch left and right indent on the text.
This reduces the amount of text you can type on one line of the label (the label
can accommodate much more text than you are allowed to type).

The normal indent that is applied when you use other printer drivers is .07
inches.

Additional query words: 97 gaps cutoff wrong size fit too big small

======================================================================
Keywords          : kbualink97 word97 kblayout 
Technology        : kbWordSearch kbWord97 kbWord97Search kbZNotKeyword2
Version           : WINDOWS:97

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.