DOCUMENT:Q142536 25-FEB-2002 [msnetwork] TITLE :No Dial Tone When You Attempt to Connect to MSN PRODUCT :The Microsoft Network PROD/VER::2.5,2.6,5.0,5.1,5.2,5.3,5.4,6.0,6.1 OPER/SYS: KEYWORDS:kbenv kberrmsg kbtlckbfaq ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - The Microsoft Network versions 2.5, 2.6, 5.0, 5.1, 5.2, 5.3, 5.4, 6.0, 6.1 ------------------------------------------------------------------------------- SYMPTOMS ======== When you attempt to connect to MSN, The Microsoft Network, you may receive the following error message: No dial tone. Please make sure that your modem is connected properly and turned on. RESOLUTION ========== To resolve this issue, follow these steps: 1. Plug a working phone into the phone jack that you use for your modem and check for a dial tone. If you hear no dial tone, the problem is with your phone service or wiring. 2. Check to see that the modem is correctly connected to the telephone jack. Plug the telephone line from the telephone jack into the line jack on the back of the modem. If there is more than one jack on the modem make sure that the line is plugged into the correct jack. 3. If the modem is an external modem, make sure that it is turned on. 4. Verify that the "Wait for dial tone before dialing" option is enabled. To do this, follow these steps: a. Click Start, point to Settings, and then click Control Panel. b. Double-click Modems. c. Click your modem, and then click Properties. d. Click the Connection tab. e. Select the Wait for dial tone before dialing check box. f. Click OK, click Close, and then close Control Panel. 5. Verify that no running programs are using the modem. To do this, follow these steps: a. Press CTRL+ALT+DELETE. b. In the Close Program dialog box, look for any program that may use the modem. Click that program, and then click End Task. c. Repeat this step until all programs that may be trying to use the modem are no longer running. If these steps do not adequately resolve the issue, the Computer manufacturer, or the Modem manufacturer may be able to provide further assistance. Also, consider getting the line or phone jack checked by the phone company, or replacing the phone cord itself. MORE INFORMATION ================ The "No dial tone" message may also be generated if you have automated voice messaging installed. If there is even one message waiting on the telephone, it beeps several times before generating a dial tone. Dial-Up Networking then returns a "No dial tone" message. To resolve this issue, add two or three commas before the number to be dialed. This allows the dialer to bypass the beeps and hear the dial tone. Additional query words: msnet msnetwork microsoft-net m.s.n. kbimu msn explorer ====================================================================== Keywords : kbenv kberrmsg kbtlc kbfaq Technology : kbMSNSearch kbMSN600 kbMSN610 kbMSN520 kbMSN530 kbMSN510 kbMSN500 kbMSN260 kbMSN250 kbMSN540 Version : :2.5,2.6,5.0,5.1,5.2,5.3,5.4,6.0,6.1 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.