DOCUMENT:Q196974  10-AUG-2001  [crossnet]
TITLE   :How to Dial Phone Access Codes with Dial Up Networking
PRODUCT :Windows for Workgroups and Windows NT Networking Issues
PROD/VER:WINDOWS:95; winnt:4.0,4.0a,4.5
OPER/SYS:
KEYWORDS:kbnetwork

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows 95 
 - Microsoft Windows 98 
 - Microsoft Windows NT Server version 4.0 
 - Microsoft Windows NT Server, Enterprise Edition version 4.0 
 - Microsoft Windows NT Server version 4.0, Terminal Server Edition 
-------------------------------------------------------------------------------

SUMMARY
=======

Some local PBX switches will not allow local or long distance calls without
first entering an access code. Some switches also require an access code after
the number has been dialed. The use of calling card rules in Telephony will
allow Dial-Up Networking to dial these access codes to reach outside lines.

Windows NT Server 4.0 with Service Pack 4 and Windows 98
--------------------------------------------------------

1. Click Start, point to Settings, and click Control Panel. Double-click the
   Telephony icon.

2. On the My Locations tab, click Calling Card.

3. When the Calling card box appears, click New and give the card a name. Click
   OK to dismiss the dialog box that appears after you enter the name.

4. To set the dialing rules for this card, click Long Distance Calls. Select the
   number to dial for each step. Any access code should be entered under
   Specific Digits. In the drop down box for the last step you use, click Done.
   Click OK.

5. Set International calls in the same manner.

6. Click OK when done setting up rules.

7. Click to select the For Long Distance Calls, Use This Calling Card check box
   and then select the calling card you just created. Click OK.

Windows NT Server 4.0, Terminal Server Edition 4.0 and
Windows NT Server 4.0 with Service Pack 3 or earlier
-----------------------------------------------------------------------------------------------------------

1. Click Start, point to Settings, and then click Control Panel. Double- click
   the Telephony icon.

2. On the My Locations tab, click to select the Dial Use Calling Card check box.
   The default will be None (direct dial).

3. Click Change.

4. When the Change Calling card dialog box appears, click New and then give the
   card a name. Click OK to dismiss the dialog box that appears after you enter
   the name.

5. When prompted for calling card rules, enter the string to dial for each type
   of call: local, long distance, and international.

For a list of all acceptable strings, please see the following article in the
Microsoft Knowledge Base:

   Q167220 How to Create Custom Calling Card Rules

Windows 95
----------

1. Click Start, point to Settings, and then click Control Panel. Double- click
   the Modems icon.

2. On the General tab, click to select the Dialing Properties check box.

3. On the My Locations tab, click to select the Dial Use Calling Card check box.
   If an entry is already listed, click Change.

4. When the Change Calling Card dialog box appears, enter a space in the box for
   the calling card to use. Click New and give the new card a name. If the rules
   box does not appear, click Advanced to enter rules.

5. When prompted for calling card rules, enter the string to dial for each type
   of call: local, long distance, and international.

For a list of all acceptable strings, please see the following article in the
Microsoft Knowledge Base:

   Q167220 How to Create Custom Calling Card Rules

MORE INFORMATION
================

The autodial feature of Proxy Server will ignore Telephony settings in some
cases. For additional information, refer to the following article:

For additional information, please see the following article(s) in the Microsoft
Knowledge Base:

   Q181407 Troubleshooting Proxy RAS Autodial and Autodisconnect

Additional query words: smallbiz

======================================================================
Keywords          : kbnetwork 
Technology        : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTSEntSearch kbWinNTSEnt400 kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch kbWin95search kbWin98search kbZNotKeyword3 kbWin98
Version           : WINDOWS:95; winnt:4.0,4.0a,4.5
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.