DOCUMENT:Q93512 30-JUL-2001 [lanman] TITLE :Reading LOGSHOW Information PRODUCT :Microsoft LAN Manager PROD/VER: OPER/SYS: KEYWORDS: ====================================================================== SUMMARY ======= LOGSHOW is a utility that displays information about disk adapters, disk drives, CD-ROM drives, and tape drives installed on the system. LOGSHOW resides in the C:\OS2\SUPPORT directory. MORE INFORMATION ================ The general format of an error log entry displayed by LOGSHOW is as follows: devnam cccc mm/dd/yy hh:mm:ss - meaning of code additional information The following are the standard error log entry displays: devnam 000a mm/dd/yy hh:mm:ss-Informational:Real ESDI inquiry data follows: 00 00 00 00 00 00 00 00 GENERIC ESDI DISK TYPEnn Where Is ------ -- devnam Normally DEVINQ, which is the temporary device name used while the device is being configured mm The disk type code specified during setup of the PC devnam ffff mm/dd/yy hh:mm:ss - Informational: configure physical disk AOK Apparent Geometry: ggggg hhhhhhhhh iiiiii jjjj kkkk llll Actual Geometry: ggggg hhhhhhhhh iiiiii jjjj kkkk mmmmm Media BPB: ggggg nnn ppppp qqq rrrrr sssss tt uuuuu vvvvv wwwww xxxxxxxxx yyyyyyyyy Recommnd BPB: ggggg nnn ppppp qqq rrrrr sssss tt uuuuu vvvvv wwwww xxxxxxxxx yyyyyyyyy Where Is ----- -- devnam The name of the physical disk drive that has just been configured ggggg Sector size in bytes hhhhhhhhh The number of sectors on the physical volume iiiiii The number of cylinders in the physical volume jjjj The number of data heads accessing the physical volume kkkk The number of sectors per track llll Flags, in hex, that show how the geometry data was generated: 0x8000 Apparent geometry was already set by the time that the TSD first gained control. 0x4000 Actual geometry was already set by the time that the TSD first gained control 0x2000 Actual geometry was set from the apparent geometry by the TSD because the actual geometry was null 0x1000 Apparent geometry was set from the ROM data (INT 13 function 8) by the TSD 0x0800 Apparent geometry was set from the BPB in the primary partition boot record by the TSD 0x0400 Media BPB was initialized by the TSD 0x0200 Recommended BPB was initialized by the TSD 0x0100 Recommended BPB was set from the BPB in the primary partition boot record by the TSD 0x0080 Geometry set from ROM by BID 0x0040 Geometry set from internal disk characteristics table by BID 0x0020 Geometry set using values determined through auto- configuration by BID 0x0010 Geometry set using values from INT 41 or INT 46 by BID 0x0008 Apparent and actual geometry set by BID mmmmm The cylinder number from which write precompensation is to be used nnn The cluster size ppppp The number of reserved sectors qqq The number of FATs rrrrr The number of directory entries sssss The number of sectors in the partition, if less than 65,536 sectors tt The media descriptor, in hex uuuuu The number of sectors used by each FAT vvvvv The number of sectors per track wwwww The number of heads xxxxxxxxx The number of hidden sectors yyyyyyyyy The number of sectors in the partition, if more than 65,535 sectors Additional query words: 2.10 ====================================================================== Keywords : ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.