DOCUMENT:Q97869 30-JUL-2001 [lanman] TITLE :Cannot Delete Stuck Print Jobs when Using HPREDIR PRODUCT :Microsoft LAN Manager PROD/VER: OPER/SYS: KEYWORDS:kbnetwork ====================================================================== SUMMARY ======= The Hewlett-Packard (HP) Network Printer system, which redirects OS/2 print queues to printers directly attached to the network, does not allow you to delete a stuck print job from a queue and let the other queued jobs print. Instead, it requires you to reboot the server to delete stuck jobs, which may not be possible in a production environment. Below is a workaround to this restriction. Note: The new PMSPL.DLL comes with the OS/2 1.3 for LAN Manager 2.1a and 2.2. If you are not upgrading, you can copy the new PMSPL.DLL to your OS/2 server and replace the old one. If you are using HPFS386, copy the .DLL by shutting down your server and rebooting with HPFS386 Recovery Disk 1. If you are not using HPFS386, boot from the Microsoft OS/2 1.3 floppy disk. When you have done this, copy the new PMSPL.DLL onto C:\OS2\DLL. SYMPTOMS ======== When the OS/2 print spooler attempts to delete a job it tries to close both the spool file and the device that it is printing to. It cannot do this and you are unable to delete the job. CAUSE ===== The spooler apparently has trouble interacting with the HP print device HPREDIR. If you shut down HPREDIR, the print device is considered closed and you can then cancel the stuck print job. WORKAROUND ========== If HPREDIR is running as a detached process, HP has provided a back door that lets you shut it down without taking down the server. Follow this procedure: 1. Make sure SETUP.EXE in C:\HPNETPRN is not running. 2. Go to your C:\HPNETPRN directory and run INSTALL.EXE. 3. Go through the screens of the install process, pressing ENTER until you are prompted for the directory to copy the files to. 4. At this dialog box choose CANCEL to exit the Install program. This stops HPREDIR. Once you've deleted the stuck print job, restart your printers by going to the C:\HPNETPRN directory from any OS/2 window and entering: " DETACH HPREDIR" (without the quotation marks) After a few seconds your printers should be functioning properly again. Additional query words: 2.10 2.1 hpredir stuck delete cancel QUEUE DRIVER COMTOKR ====================================================================== Keywords : kbnetwork ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.