DOCUMENT:Q99263 30-JUL-2001 [lanman] TITLE :Installing Compaq 32-bit Fast SCSI-2 Drivers PRODUCT :Microsoft LAN Manager PROD/VER: OPER/SYS: KEYWORDS:kbnetwork ====================================================================== SUMMARY ======= The CPQC710.BID driver supports disk, tape and CD-ROM drives with the integrated 32-bit fast-SCSI-2 controller found on COMPAQ ProSignia systems and the 32-bit fast-SCSI-2 controller. This article explains how to install the 32-bit fast-SCSI-2 controller support (which comes with the Compaq Prosignia and Systempro XLs) and how to adapt HPFS recovery disks just in case. The procedure is excerpted from a readme file on Compaq OS/2 support diskette. This driver is not included with the Microsoft OS/2 1.3 installation disks. MORE INFORMATION ================ Installing on New Systems ------------------------- 1. Make a backup copy of the MS OS/2 1.3 Install A diskette using the DISKCOPY command. 2. Boot the system from this backup copy. 3. At the Microsoft Operating System/2 Installation screen, press the ESC key. This displays an OS/2 command prompt. 4. Insert the COMPAQ OS/2 support software diskette in drive A:. 5. At the OS/2 command prompt type the command: " CPQC710 NEW" (without the quotation marks) 6. Follow the directions and insert the requested diskettes when prompted. This command file modifies the backup copy of the MS OS/2 Install A diskette by expanding and copying a new BASEDD01.SYS file (renaming the existing version BASEDD01.OLD) and the CPQC710.BID file to the root directory of the diskette. 7. If the system will be booting from the fast SCSI-2 controller but contains other disk controllers, rename CPQC710.BID to BOOTBID.BID on the modified backup copy of the MS OS/2 Install A diskette. 8. Reboot the system with the backup copy of the MS OS/2 Install A diskette in drive A:. 9. Install OS/2. Installing on Systems with MS OS/2 1.3 Already Installed -------------------------------------------------------- 1. Insert the COMPAQ OS/2 support software diskette in drive A:. 2. Change the current directory to the root directory of drive A: and type this command: " CPQC710 UPDATE" (without the quotation marks) This renames the original BASEDD01.SYS as BASEDD01.OLD, should it ever be needed again, and copies and expands the CPQC710.BID and BASEDD01.SYS fast-SCSI-2 controller LADDR driver files. 3. Shut down OS/2 and reboot the system to load the new driver. Creating an HPFS Recovery Disk 1 -------------------------------- IMPORTANT: Perform this procedure as soon as you finish installing Microsoft OS/2 and LAN Manager. 1. After you have completed installation, make a backup copy of the LAN Manager HPFS recovery disk 1 using the DISKCOPY command. 2. Insert the COMPAQ OS/2 support software diskette in drive A:. 3. Change to drive A: and type this command: " CPQC710 RECOVERY" (without the quotation marks) 4. Follow the directions and insert the requested diskettes when prompted. This command file modifies the backup copy of the LAN Manager HPFS recovery disk 1 by expanding and copying a new BASEDD01.SYS file (renaming the existing version BASEDD01.OLD) and the CPQC710.BID file to the root directory of the diskette. 5. If the system will be booting from the fast-SCSI-2 controller but there will be other disk controllers present, rename CPQC710.BID to BOOTBID.BID on the modified backup copy of the LAN Manager HPFS recovery disk 1. Using the 32-Bit Fast-SCSI-2 Controller with Other Disk Controllers ------------------------------------------------------------------- If the fast-SCSI-2 controller is the primary disk controller in a system with other disk controllers such as ESDI, IDA IAES, or IDE, you must rename the CPQC710.BID driver to BOOTBID.BID. DO NOT JUST COPY IT: under no circumstances should two drivers named CPQC710.BID and BOOTBID.BID appear in the root directory. If you are installing onto a new system by creating a modified Install A diskette, you must copy CPQC710.BID to BOOTBID.BID onto Install A. Additional query words: 2.20 2.2 Compaq Prosignia System Pro Systempro ====================================================================== Keywords : kbnetwork ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.