DOCUMENT:Q146772 15-SEP-1999 [schedplus] TITLE :Converting from 1.0 CAL File to 7.0 .SCD File PRODUCT :Microsoft Schedule+ for Windows PROD/VER:WINDOWS:7.0 OPER/SYS: KEYWORDS: ====================================================================== 7.00 WINDOWS kbusage ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Schedule+ for Windows, version 7.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When you update to Schedule+ version 7.0 from Schedule+ version 1.0, the .CAL file extension may not be recognized by Schedule+ version 7.0 Import command. CAUSE ===== The above can be caused by one of the following conditions: - The option to Use an Existing File the first time you started Schedule+ version 7.0 was not selected. - An invalid .CAL file is selected or the password is forgotten. - System or network problems during the *.CAL file import are experienced. RESOLUTION ========== 1. Click Open on the File menu. Then select Archive or Project Schedule... 2. Locate and select the .CAL file. Click the OK button. 3. Enter the password. The .CAL file will open in a separate window. 4. From "old" Schedule+ window, click Export Appointments on the File menu. Then select Schedule+ Interchange, and copy the export file with the extension *.SC2. Click the OK button and close the "old" Schedule+ window. 5. From the "new" Schedule+ window, click Import on the File menu. Then select Schedule+ Interchange. Locate and select the file you created in step 4. Click the OK button. The data now will be imported from the old .CAL file. Additional query words: 1.00 schedule plus ====================================================================== Keywords : Technology : kbScheduleSearch kbSchedule700 Version : WINDOWS:7.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.