DOCUMENT:Q225206 20-APR-2001 [exchange] TITLE :XCON: Multiple Servers Can't Send to Another Server in Same Site PRODUCT :Microsoft Exchange PROD/VER:winnt:5.0,5.5 OPER/SYS: KEYWORDS:exc5 exc55 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Exchange Server, versions 5.5, 5.0 ------------------------------------------------------------------------------- SUMMARY ======= The purpose of this article is to provide some tips on basic troubleshooting of mail delivery problems caused by recent network changes. MORE INFORMATION ================ Problem ------- After working properly for some time, the Exchange Server Message Transfer Agent (MTA) may have difficulties sending messages to other servers in the same Exchange Server site. This may be because the Exchange Server computer's connection to the network infrastructure has changed. The following events may be logged when the network connectivity has been changed, and the MTA experiences remote procedure call (RPC) errors when trying to connect to other Exchange Servers computers: Application Log Events: Event ID: 1153 Description: An interoperability error occurred. A reliable transport service element (RTSE) error occurred. Incorrect session protocol data unit (SPDU). SPDU ID 29, SPDU field in error 41. [PLATFORM RTSE 34 151](14) Event ID: 1209 Description: Unable to recognize an internal message identifier (LPI) from entity. The incorrect LPI is 108-1-5. Control block index 32. [PLATFORM KERNEL 27 62] (14) Event ID: 1198 Description: An error occurred while processing an association to entity. Presentation error: state check failure. Current state 0, service type 20, service flavor 2 Control block index 33. The association will be terminated and restarted if necessary. [PLATFORM KERNEL 31 108] (14) Event ID: 1222 Description: An error occurred while processing an association with entity. Session error: state check failure. Current state 7. NIST defined current event 6. Control block index 33. The association will be terminated and restarted if necessary. [PLATFORM KERNEL 31 82] (14) Event ID 1001: There has been an association error with entity:. The internal connection handle (LPT) is incorrect. The incorrect LPI is 1-13-33. Control block index 2004 [PLATFORM RTSE 34 146] (14) Event ID 9277: The MTA has issued an RPC Cancel call for thread 1, Locality Table Index: 192, Time (ms): 1318100, Cancel result: 0 [RESFW01 MtaBind ncacn_ip_tcp:166.35.134.1[1092] BASE IL] (14) Event ID: 9322 Description: An interface error has occurred. An MtaBindBack over RPC has failed. Locality Table (LTAB) index: 213, NT/MTA error code: 9260. Comms error BASE IL, Bind error INCOMING RPC, Remote Server Name 106, Protocol String 507 [%7 %8 %9 %10] (14) Event ID: 25 Description: An internal error occurred while transferring a message or report. [2474Receive RT-TRANSFER ind Send - pop-mta has the turn MTA XFER-IN 21 58] (14) Event ID: 1131 Description: An interoperability error occurred with entity /O=ORG/OU=USAE001/CN=CONFIGURATION/CN=SERVERS/CN=BRB45/CN=MICROSOFT MTA. A reliable transport service element (RTSE) error occurred. There is an incorrect internal connector handle (LPI) on the message. The incorrect LPI is 1-13-37. Control block index 2004. [PLATFORM RTSE 33 147] (14) The MTA may log the above events when the Exchange Server computer's connection to the network infrastructure is unreliable. Examples of where network configuration may cause message delivery problems: - The Exchange Server computer has been moved to a new Ethernet switch port that auto-senses network speed. However, the Exchange Server computer's network interface card (NIC) is configured to force full-duplex communication at 100-megabit network transfer speeds. - Both the Ethernet switch port and the Exchange Server computer's NIC are configured to force 100-MB full-duplex communication. However, the Ethernet switch or the network card may be having trouble communicating at that rate or using full-duplex transmissions. The following are some tips to troubleshoot network connectivity as a cause for message delivery problems: 1. If there is another nearly identical Exchange Server computer connected to the same model of Ethernet switch as the problem server, try trading the Exchange Server computers' switch ports. If after doing so, the problem server can successfully send and receive mail, compare the configurations of the two Ethernet switch port for differences. 2. If step 1 does not resolve the issue, then compare the two Exchange Server computers' network card configurations to see if there are differences. Also verify that the same version or date of the network card driver is being used on both servers. Change the problem server's network card configuration to be the same as that of the working Exchange Server computer. 3. If there is not an identical working Exchange Server computer to examine for comparisons or if mail flow must be established immediately, connect the problem Exchange Server computer to a half-duplex 10-MB Ethernet switch port or hub to see if mail flow can be established. In the Exchange Server's system event log, you may observe the following event IDs: Event ID: 5716 Description: The partial synchronization replication of the SAM database from the primary domain controller failed with the following error: "The remote procedure call failed." Event ID: 3013 Description: The redirector has timed out a request to Server01. Event ID: 5719 Description: No Windows NT Domain Controller is available for domain LCORP. (This event is expected and can be ignored when booting with the 'No Net' Hardware Profile.) The following error occurred: "There are currently no logon servers available to service the logon request." These events indicate that the Windows NT services such as the replication service are experiencing similar difficulties using the network. Additional query words: 1209 1198 1131 25 1222 9322 9277 5719 5716 MSExchangeMTA ====================================================================== Keywords : exc5 exc55 Technology : kbExchangeSearch kbExchange500 kbExchange550 kbZNotKeyword2 Version : winnt:5.0,5.5 Issue type : kbhowto ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.