DOCUMENT:Q244413  27-OCT-1999  [exchange]
TITLE   :XFOR: Can't Reply to E-mail from MEMO
PRODUCT :Microsoft Exchange
PROD/VER:winnt:5.5,5.5 SP1,5.5 SP2,5.5 SP3
OPER/SYS:
KEYWORDS:exc55 exc55sp1 exc55sp2 exc55sp3

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Exchange Server, versions 5.5, 5.5 SP1, 5.5 SP2, 5.5 SP3 
-------------------------------------------------------------------------------

SYMPTOMS
========

If a Verimation MEMO user sends e-mail to an Exchange Server user, the mail
appears in the Exchange Server user?s Inbox. The Exchange Server user can read
the e-mail but might not be able to reply to this e-mail because the originator
address had been changed to MEMOGWY(SNADS) or MEMOGWY.SNADS. This behavior
appears only if the MEMO user has an address with a hyphen (-) in the
distribution group name (DGN), for example, GROUP-ONE(XYZ123). There are no
problems sending e-mail from Exchange Server to the Verimation MEMO user. If the
Exchange Server user sends e-mail to the MEMO user, the MEMO user can reply to
the e-mail, and the message reaches the Exchange Server user. But the Exchange
Server user still cannot reply.

This problem doesn?t appear if the MEMO user address has no hyphen in it.

RESOLUTION
==========

This problem is based on the configuration of the connector at the SNADS side.
It?s related to the fact that the DGN.DEN has invalid characters for SNADS, such
as a hyphen. The connector or gateway at SNADS exchanges the invalid DGN.DEN
with an syntactical correct expression, "MEMOGWY.SNADS" or "MEMOGWY(SNADS)",
although the recipient can no longer reply to this address.

There are three options to resolve this issue:

 - At MEMO, use only a DGN.DEN with correct syntax, which is allowed from SNADS.
   This is the preferred solution.

 - Accept this behavior, so that MEMO users still can send to Exchange Server,
   but Exchange Server users cannot use the reply functionality of their e-mail
   client software. They must choose the reply address from the global address
   list or type the one-off address manually to send e-mail to the MEMO user.

 - At SNADS, configure the settings at Exit GWYZXR01 in such a way that these
   invalid addresses are already refused at the SNADS side. This causes a
   non-delivery report (NDR) for all DGN.DEN with invalid characters. MEMO users
   who have this kind of DGN.DEN cannot deliver mail to the Exchange Server
   system.

Additional query words:

======================================================================
Keywords          : exc55 exc55sp1 exc55sp2 exc55sp3 
Technology        : kbExchangeSearch kbExchange550 kbZNotKeyword2 kbExchange550SP1 kbExchange550SP2 kbExchange550SP3
Version           : winnt:5.5,5.5 SP1,5.5 SP2,5.5 SP3
Issue type        : kbprb

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.