DOCUMENT:Q58771  09-NOV-1999  [macmail]
TITLE   :Mac GW: Installing a Gateway in Microsoft Mail
PRODUCT :Microsoft Mail For Appletalk Networks
PROD/VER:WINDOWS:2.0,2.0a,2.0b,3.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Mail for AppleTalk Networks, versions 2.0, 2.0a, 2.0b, 3.0 
-------------------------------------------------------------------------------

SUMMARY
=======

IMPORTANT: All Microsoft Mail version 2.00 customers who have gateways installed
should be using the "MS Mail GW" file version 2.00b and the "Microsoft Mail
Server" file version 2.00b, both of which are located in the System Folder of
the Mail server. An updated "MS Mail GW" file is available through Microsoft End
User Sales and Service at (800) 426-9400 or Microsoft International Customer
Service at (206) 936-8661, but ONLY for customers using the AppleLink Gateway to
Microsoft Mail. Customers using other gateways must obtain an updated "MS Mail
GW" file from the developer of the gateway they are using. The Microsoft Mail
server upgrade can also be obtained at the above numbers.


Below are the steps in using the Gateway Installer program to install a generic
gateway for Microsoft Mail. Since these are the steps for installing a generic
gateway, the steps for installing a real gateway (for example, the AppleLink
gateway) will vary.

MORE INFORMATION
================

The gateway must be installed on a Microsoft Mail server that is up and running.
This Mail server is known as the gateway server.

1. Copy the gateway files to the server's hard disk. Also copy the file "MS Mail
   GW" to the System Folder of the gateway server.

2. From the Apple menu, choose the Chooser and click the icon for Microsoft
   Mail.

3. Click the name of the mail server on which you are installing the gateway.
   Close the Chooser.

4. Start the Gateway Installer program. The name of the mail server selected in
   Step 3 should be displayed.

5. From the Gateway menu, choose Install Gateway.

6. In the Open dialog box, select the gateway resource file to install. Click
   the Install button.

7. When done, choose Quit from the File menu.

8. Connect any communications hardware required by the gateway, for example, a
   modem or serial cable, to the modem port. Gateways may even use AppleTalk for
   communications.

9. Restart the gateway server Macintosh.

10. From the Apple menu, choose the Chooser and click the icon representing the
   file "MS Mail GW".

11. Click the name of the gateway server, the same server as in step 4 above.
   Close the Chooser.

12. The Network Manager should set up gateway accounts if needed and do gateway
   configuration if needed.

At this point, the generic gateway installed with the above steps should be ready
to send and receive mail.

Additional query words: 2.00 2.00a 2.00b 3.00

======================================================================
Keywords          :  
Technology        : kbMailSearch kbZNotKeyword3 kbMailATN300 kbMailATN200 kbMailATN200a kbMailATN200b
Version           : WINDOWS:2.0,2.0a,2.0b,3.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.