DOCUMENT:Q151414  09-AUG-2001  [winnt]
TITLE   :Windows 95/98 Partition Types Not Recognized by Windows NT
PRODUCT :Microsoft Windows NT
PROD/VER::; winnt:3.5,3.51,4.0
OPER/SYS:
KEYWORDS:kbenvkbfaq

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Advanced Server 
 - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 
 - Microsoft Windows NT Server versions 3.51, 4.0 
-------------------------------------------------------------------------------


SUMMARY
=======

Windows NT does not recognize Windows 95/98 FAT32 partitions. There are
currently no plans to create a FAT32 driver for Windows NT.

MORE INFORMATION
================

OEM versions of Windows 95 support four partition types for FAT file systems
that Windows NT does not recognize. The partition type can be identified by the
System ID byte in the partition table. This byte is located at the following
offsets:

   0x1C2 = Partition 1
   0x1D2 = Partition 2
   0x1E2 = Partition 3
   0x1F2 = Partition 4

The four values used by Windows 95 that Windows NT does not recognize are as
follows:

   0x0B      Primary  Fat32 Partitions up to 2047 GB
   0x0C      Same as 0x0B, uses Logical Block Address Int 0x13 extensions
   0x0E      Same as 0x06, uses Logical Block Address Int 0x13 extensions
   0x0F      Same as 0x05, uses Logical Block Address Int 0x13 extensions

The FAT partition types that Windows NT version 3.X and 4.0 can recognize are:

   0x01      Fat12 < 10 megabytes
   0x04      Fat16 < 32 megabytes
   0x06      Fat16 > 32 megabytes
   0x05      Extended (may be FAT, HPFS or NTFS)

To work around this issue when you install Windows NT 4.0, make sure that both
your boot partition and the partition you are installing to is either formatted
with the FAT16 or NTFS file system, or is not formatted.

For more information about the FAT32 file system or troubleshooting Windows NT
4.0 Setup, click an article number below to view that article in the Microsoft
Knowledge Base:

   Q126690 Windows NT 4.0 Setup Troubleshooting Guide

   Q154997 Description of the FAT32 File System

   Q173694 Err Msg: ERROR: Setup Was Unable to Install the Boot Loader



Additional query words: 3.10 3.50 3.51 4.00 prodnt

======================================================================
Keywords          : kbenv kbfaq
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTAdvSerSearch kbWinNTS351search
Version           : :; winnt:3.5,3.51,4.0
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.