DOCUMENT:Q180928 14-MAR-2000 [sna] TITLE :5250 Applet Fails to Connect, Displaying Error [0003][00000005] PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:3.0,3.0 SP1,3.0 SP2,4.0 OPER/SYS: KEYWORDS:kbbuglist ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 3.0, 3.0 SP1, 3.0 SP2, 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== The following problem may occur when you use the 5250 applet, which is provided with SNA Server. Other third-party 5250 emulators, APPC programs, or CPIC programs may report a different error message. After you start a 5250 session and enter an AS/400 Userid and Password in the AS/400 logon dialog box, the 5250 session shows a blank screen displaying the following message in the lower left corner of the applet: Opening Connection to After a while the following error message appears: Could not connect to remote host [0003] [00000005] An APPC program will receive the following error message: primary_rc - 0x0003 (AP_ALLOCATION_ERROR) secondary_rc = 0x00000005 (AP_ALLOCATION_FAILURE_RETRY) And a CPIC program will receive the following error message: rc = 2 (CM_ALLOCATE_FAILURE_RETRY) When you connect to an AS/400, this may also coincide with Event 23 with a Qualifier = 00AE in the Windows NT application log of the event viewer. CAUSE ===== This error can occur when you configure the Implicit Incoming Remote LU (pointing to the Remote LU Alias) from the Local APPC LU folder, and if an APPC mode is selected in the Implicit Incoming Mode from the Remote LU folder. WORKAROUND ========== To work around this problem, change both the Implicit Incoming Remote LU and the Implicit Incoming Mode to none. Resave the configuration file, and restart the affected SNA Server service. STATUS ====== Microsoft has confirmed this to be a problem in SNA Server version 3.0, 3.0 SP1, and 4.0. This problem was corrected in the latest Microsoft SNA Server 4.0 U.S. Service Pack 1. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K MORE INFORMATION ================ For additional information, please see Knowledge Base article Q166529, "APPC Applications Fail to Connect to SNA Server 3.0." Additional query words: ====================================================================== Keywords : kbbuglist Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ400 kbSNAServ300SP1 kbSNAServ300SP2 Version : WINDOWS:3.0,3.0 SP1,3.0 SP2,4.0 Issue type : kbbug Solution Type : kbnofix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.