DOCUMENT:Q186674 09-AUG-2001 [winnt] TITLE :STOP: C0000143 or 0x0000001E Caused by Remotely Possible/32 PRODUCT :Microsoft Windows NT PROD/VER:winnt:4.0,4.0a OPER/SYS: KEYWORDS:sbs ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft BackOffice Server 4.0 - Microsoft Windows NT Server version 4.0 - Microsoft Windows NT Workstation version 4.0 - Microsoft Windows NT Server, Enterprise Edition version 4.0 - Microsoft BackOffice Small Business Server versions 4.0, 4.0a ------------------------------------------------------------------------------- SYMPTOMS ======== If you have Remotely Possible/32 installed on your computer running Windows NT, you may experience one of the following errors when restarting. STOP: C0000143 (MISSING SYSTEM FILES) The required system file Display_driver.dll is bad or missing. -or- STOP: 0x0000001E (0xC0000005, 0xA0036FC2, 0x00000000, 0x00000004) KMODE_EXCEPTION_NOT_HANDLED address 0xA0036FC2 in Win32K.sys NOTE: Actual address may vary for Win32k.sys. CAUSE ===== The STOP C0000143 error can occur if one of the following files is corrupted or deleted: - Rp32ntvx.dll (where x = 1-6, Rp32ntv1.dll through Rp32ntv6.dll) - Vga.dll The STOP 0x0000001E error can occur if the Remotely Possible/32 Logonrem.dll file is corrupted or deleted. RESOLUTION ========== To resolve this problem, perform the following steps: 1. Install Windows NT 4.0 into a parallel installation. For information on how to modify the registry of a secondary installation and disable services, refer to the following Microsoft Knowledge Base article: Article-ID: Q165748 Titled : How to Disable a Service or Device that Prevents NT from Booting 2. Use Regedt32 to change the following registry entries in the failing Windows NT %systemroot%\system32\config\system hive by following these steps: WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk. For information about how to edit the registry, view the "Changing Keys And Values" online Help topic in Registry Editor (Regedit.exe) or the "Add and Delete Information in the Registry" and "Edit Registry Data" online Help topics in Regedt32.exe. Note that you should back up the registry before you edit it. 3. Run Regedt32 and load the System hive from the failing Windows NT installation. NOTE: This key will be called TEST in the steps below. ControlsetXXX represents the controlset that your failing computer should boot from then next time it is restarted based on the CURRENT:Reg_Dword:0xY value found in the SELECT key. a. In the HKEY_LOCAL_MACHINE\TEST\controlsetXXX\services\RP32Service key, change the value of Start:REG_DWORD: to 0x4. b. In the HKEY_LOCAL_MACHINE\TEST\controlsetXXX\services\RP32Spin key, change the value of Start:REG_DWORD: to 0x4. c. In the HKEY_LOCAL_MACHINE\TEST\controlsetXXX\services\RP32SWire key, change the value of Start:REG_DWORD: to 0x4. d. In HKEY_LOCAL_MACHINE\TEST\controlsetXXX\services\vgasave key, ensure ImagePath reads \Systemroot\system32\drivers\vga.sys. e. In the HKEY_LOCAL_MACHINE\TEST\controlsetXXX\services\vgasave \device0 key, change InstalledDisplayDrivers from rp32ntv1 to VGA. NOTE: The above registry key is one path; it has been wrapped for readability. 4. Select the TEST hive, and then click Unload Hive from the Registry menu. 5. Load the Software hive from the failing Windows NT %systemroot%\system32\config\ folder. NOTE: This key will also be called TEST in the steps below. a. Double-click the new TEST key and follow this path: Microsoft\Windows NT\Current Version\Winlogon b. Modify the entry Ginadll:REG_SZ:logonrem.dll to Msgina.dll 6. Select the TEST hive, click Unload Hive from the Registry menu, and then exit Regedt32. 7. Copy the Vga.sys file (found in %systemroot%\system32\drivers) from your parallel installation to the original installation of Windows NT. 8. Copy the Msgina.dll and Vga.dll files (found in %systemroot%\system32) from the parallel installation to the original installation of Windows NT. 9. Shut down and restart your computer in your original Windows NT installation. This will allow you to boot back into the operating system, but you will be in VGA mode until the entry for the computer's actual video driver XXX name is modified if Rp32ntv1 is corrupted or missing: In the following key, change InstalledDisplayDrivers from rp32ntv1 to vga: HKEY_LOCAL_MACHINE\System\CurrentControlSet\services\XXX\device0 MORE INFORMATION ================ Normally, if a standard Windows NT system file is deleted or corrupted and prevents the operating system from restarting, we can perform a system repair using an emergency repair disk (ERD). The ERD contains a file called Setup.log, which has CRC information for each Windows NT system file installed. When we choose to "verify Windows NT system files" during a repair process, any file that is missing or whose CRC value does not match the value stored in the Setup.log file will be replaced from the original Windows NT setup compact disc. Unfortunately, Remotely Possible's setup program does not add entries into the Windows NT Setup.log file for a repair process to work, so other means of repair are necessary. The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: c143 0x1e possible32 Rp32 smallbiz ====================================================================== Keywords : sbs Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTSEntSearch kbWinNTSEnt400 kbWinNTS400search kbWinNTS400 kbAudDeveloper kbBackOfficeSearch kbSBServSearch kbBackOfficeServ400 kbSBServ400 kbSBServ400a Version : winnt:4.0,4.0a Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.