DOCUMENT:Q242183 20-MAY-2002 [winnt] TITLE :Cisco Cable Modem Cannot Receive IP Address from DHCP Server PRODUCT :Microsoft Windows NT PROD/VER:winnt:4.0 OPER/SYS: KEYWORDS:kbWinNT4sp6fix ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 4.0, Terminal Server Edition - Microsoft Windows NT Server version 4.0 - Microsoft Windows NT Server, Enterprise Edition version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When you use a Cisco cable modem, you may not be able to receive an Internet Protocol (IP) address from a Windows NT 4.0 Server-based computer using Dynamic Host Configuration Protocol (DHCP). The server generates an "error 10040" error message. CAUSE ===== This behavior occurs because the cable modem client sends a packet larger than the maximum length of the DHCP packet as defined in the RFC (576 bytes). RESOLUTION ========== Windows NT Server or Workstation 4.0 ------------------------------------ To resolve this problem, obtain the latest service pack for Windows NT 4.0 or the individual software update. For information on obtaining the latest service pack, please go to: - http://www.microsoft.com/Windows/ServicePacks/ -or- - Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack For information on obtaining the individual software update, contact Microsoft Product Support Services. For a complete list of Microsoft Product Support Services phone numbers and information on support costs, please go to the following address on the World Wide Web: http://support.microsoft.com/default.aspx?scid=fh;EN-US;CNTACTMS Windows NT Server 4.0, Terminal Server Edition ---------------------------------------------- To resolve this problem, obtain the latest service pack for Windows NT Server 4.0, Terminal Server Edition. For additional information, please see the following article in the Microsoft Knowledge Base: Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack STATUS ====== Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT Server version 4.0, Terminal Server Edition Service Pack 6. Additional query words: ====================================================================== Keywords : kbWinNT4sp6fix Technology : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTSEntSearch kbWinNTSEnt400 kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch Version : winnt:4.0 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.