DOCUMENT:Q255796 27-JUN-2001 [winnt] TITLE :Updating a Management Agent's Templates from Its Working Folder PRODUCT :Microsoft Windows NT PROD/VER::2.1,2.2,2.2 SP1 OPER/SYS: KEYWORDS:kbtool ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Metadirectory Services, versions 2.1, 2.2, 2.2 SP1 ------------------------------------------------------------------------------- SUMMARY ======= You can update a Management Agent's templates from its working folder by running "Update Management Agent." You may need to update your Management Agent templates to recover from unsuccessful Management Agent changes or to transfer a Management Agent between Microsoft Metadirectory Services-based servers. Management Agent templates are stored as attributes of the Management Agent object in the metaverse. By default, the Management Agent will be updated with the included templates in the Zoomserv\Data\Dsgates folder. Any customization you have performed in the Design MA area will be lost. If you have recorded your templates to the working folder, this article describes how to refresh the Management Agent with those templates. MORE INFORMATION ================ Before following these steps, you must either: - Have recorded the customized Management Agent templates to the working folder and now need to restore the metaverse with your customized templates. For information about recording Management Agents templates to the working folder, see the following article in the Microsoft Knowledge Base: Q250479 Recording Management Agent Templates in Microsoft Metadirectory Services - Have custom templates that you want to use in place of the current templates. You have copied them into the working folder, overriding the existing templates. Updating a Management Agent from the Working Folder --------------------------------------------------- 1. Log on to the Compass client with administrator access. 2. Click the MA that you want to update. 3. In the Actions panel, click Properties. 4. On the Recording Templates tab, click to select the "Update this MA from its working directory's templates located at : \Zoomserv\Data\Ds\0000000#" check box. 5. Click OK. 6. In the Actions panel, click Update Management Agent. 7. In the Update Management Agent dialog box, click Yes. You should then receive a message indicating a successful update. For additional information about Management Agent working folders, click the article number below to view the article in the Microsoft Knowledge Base: Q254189 Description of the Management Agent Working Folders Additional query words: MA ====================================================================== Keywords : kbtool Technology : kbMMSSearch kbMMS210 kbMMS220 kbMMS220SP1 Version : :2.1,2.2,2.2 SP1 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.