DOCUMENT:Q120265  10-JUN-1999  [homegame]
TITLE   :Using the Diamond Viper Video Card with Space Simulator
PRODUCT :Microsoft Home Games
PROD/VER:MS-DOS:1.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Space Simulator for MS-DOS, version 1.0 
-------------------------------------------------------------------------------

SUMMARY
=======

Space Simulator can be used in 640 x 400 resolution on a Diamond Viper video
adapter if version 2.04 or later of the VPRMODE.EXE utility is used to supply
VESA 1.2 compatibility.

Space Simulator cannot use this video card in 800 x 600 resolution.

MORE INFORMATION
================

The VRPMODE driver can be obtained from the Diamond Computer Systems electronic
bulletin board by downloading VPRM204.EXE, or by contacting Diamond Computer
Systems technical support.

Follow these steps to enable the VPRMODE driver:

1. Copy VPRMODE.EXE to your Space Simulator directory (usually the C:\SPACESIM
   directory).

2. Using a text editor such as the MS-DOS Edit utility, open the AUTOEXEC.BAT
   file from the root directory of the boot drive.

3. Add the following line to the AUTOEXEC.BAT file

   c:\<path>\vprmode vesa

   where <path> is the path to the VPRMODE program. For example, if you
   copied VPRMODE.EXE to your C:\SPACESIM directory, enter the following line:

   c:\spacesim\vprmode vesa

4. Save changes to the AUTOEXEC.BAT file and restart your machine.

5. Change to the Space Simulator directory. (For example if your directory is
   named SPACESIM, type the following at the MS-DOS command prompt and press
   ENTER:

   cd\spacesim

6. Type "setup" (without the quotation marks) and press ENTER.

7. At the first Setup screen, set the Display option to:

   <2> 640 x 400 (super VGA with 512K)

8. On the next screen, set the video card type as VESA 1.2 Compatible.

9. Continue through Setup and run Space Simulator. The display will now be in
   SVGA 640 x 400, 256 colors every time you run Space Simulator.

For more information, contact Diamond Computer Systems:

   Technical support Diamond Speedstar video cards: (408) 325-7100
   BBS support 2400 only: (408) 325-7080
   BBS support 9600 only: (408) 325-7175

The third-party products discussed in this article are manufactured by vendors
independent of Microsoft; we make no warranty, implied or otherwise, regarding
these products' performance or reliability.

Additional query words: 1.00 ss1 dos blinking flickering spacesim 800x600 640x400

======================================================================
Keywords          :  
Technology        : kbGamesSearch kbZNotKeyword3 kbSpaceSim100DOS
Version           : MS-DOS:1.0
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.