DOCUMENT:Q279294  07-MAY-2002  [homegame]
TITLE   :Combat Flight Simulator 2: How to Start Your Aircraft Engine
PRODUCT :Microsoft Home Games
PROD/VER::1.0
OPER/SYS:
KEYWORDS:kbui kbimu

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Combat Flight Simulator 2: WWII Pacific Theater, version 1.0 
-------------------------------------------------------------------------------

SUMMARY
=======

This article describes how to start your aircraft engine in Microsoft Combat
Flight Simulator 2.

MORE INFORMATION
================

To start your aircraft engine in Combat Flight Simulator 2, use one of the
following methods:

Automatically Start the Engine
------------------------------

To automatically start the engine, press and hold down the E key on your keyboard
until the engine starts.

The Propeller Control knob, the Mixture Control lever, the Throttle Control
lever, the Master Battery Switch (MSTR) control, the Engine Ignition &
Magnetos Switch control, and the Engine Start Switch control automatically move
to their proper positions.

After the engine starts, the Engine Start Switch control automatically moves to
the Off position.

Manually Start the Engine
-------------------------

To manually start the engine, follow these steps:

1. Press the F5 key to open the engine controls window.

2. Press SHIFT+EQUAL SIGN to push the Propeller Control knob to the "Max.
   r.p.m." (100%) position.

3. Press SHIFT+4 to move the Mixture Control lever to the Rich (100%) position.

4. Press the EQUAL SIGN to move the Throttle Control lever two notches above the
   Close position (the 1% position).

   NOTE: To move the Throttle Control lever down a notch, press the MINUS SIGN.

5. Click to move the Master Battery Switch (MSTR) control to the On position.

6. Press the F5 key to close the engine controls window.

7. If your aircraft has a Engine Ignition & Magnetos Switch control, click
   the Engine Ignition & Magnetos Switch control until the control is set to
   the Both (Both Magnetos On) position.

8. To engage the starter, click the Engine Start Switch control.

   Hold the pointing device button down until the engine starts, and then release
   the button.

NOTE: You cannot use the Engine Start Switch control to turn off the engine.

Manually Start a Multi-Engine Aircraft
--------------------------------------

In a multi-engine aircraft such as the P-38, you must select each engine to start
it manually:

1. Press CTRL+S to enter Select Engine mode.

2. To select engine 1, press SHIFT+1.

   To select engine 2, press SHIFT+2.

3. To increase the throttle on the selected engine, press the EQUAL SIGN.

   To decrease the throttle on the selected engine, press the MINUS SIGN.

4. To exit Select Engine mode, press CTRL+S.

Additional query words: 1.00 msgame combatfs cfs2 engines

======================================================================
Keywords          : kbui kbimu 
Technology        : kbHomeProdSearch _IKkbbogus kbGamesSearch kbCombatFlightSim2 kbCombatFlightSimSearch
Version           : :1.0
Issue type        : kbhowto

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.