DOCUMENT:Q122474 13-JUN-2001 [homemm] TITLE :Encarta 1995: Manual Installation Instructions for Windows 3.x PRODUCT :Microsoft Home Multimedia Titles PROD/VER::1995 editions; WINDOWS:3.x OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Encarta 95 The Complete Interactive Multimedia Encyclopedia - the operating system: Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= This article provides instructions on how to manually set up Microsoft Encarta 1995 on Microsoft Windows operating system version 3.x. CAUTION: Do not use these steps if your are using Microsoft Windows 95 or Microsoft Windows NT. The manual installation uses a batch file that copies Windows 3.x system files onto your hard drive. Allowing the system files to be overwritten in Windows 95 or Windows NT may cause improper system performance. This installation is equivalent to the "Faster" Setup option, which requires up to 9.7 megabytes (MB) of disk space and provides the best performance. The steps below assume the following: - Your destination directory is C:\ENCARTA. - Windows is in C:\WINDOWS. - Your CD-ROM drive is drive X. MORE INFORMATION ================ Copying Files ------------- 1. Exit from Windows. 2. At the MS-DOS command prompt, change to the X:\AAMSSTP\MANUAL directory and run MANUAL.BAT by entering the following command: "manual.bat c:\windows c:\encarta" (without the quotation marks) This will copy and decompress the Compressed Audio, OLE and Video for Windows system files. 3. Type the following command: "ren c:\windows\system\msref1.ttf msref2.ttf" (without the quotation marks) 4. Create the directory C:\WINDOWS\MSAPPS\MSINFO if it does not already exist. 5. Change to the directory X:\AAMSSTP and enter the following command: "decomp -f x:\aamsstp\fonts\msref1.tt_ c:\windows\system\msref1.ttf" (without the quotation marks) "decomp -f x:\aamsstp\system\ctl3dv2.dl_ c:\windows\system\ctl3dv2.dll" (without the quotation marks) "decomp -f x:\aamsstp\system\msvidc.dr_ c:\windows\system\msvidc.drv" (without the quotation marks) "decomp -f x:\aamsstp\system\msinfo.ex_ c:\windows\msapps\msinfo\msinfo.exe" (without the quotation marks) Changes to the WIN.INI File --------------------------- Use a text editor, such as Windows Notepad, to make the following changes to the WIN.INI file, which is located in the Windows directory: 1. Find the [mci extensions] section in the file, and add the following lines if they are not already present: AVI=AVIVideo MMM=MMMovie WAV=WaveAudio MID=Sequencer 2. Create a section labeled [Microsoft System Info] and add the following line, unless the section and line are already present: "MSINFO=C:\WINDOWS\MSAPPS\MSINFO\MSINFO.EXE" (without the quotation marks) Changes to the SYSTEM.INI File ------------------------------ Use a text editor to make the following changes to the SYSTEM.INI file, which is located in the Windows directory: 1. Find the [Drivers] section, and add or modify lines so that the section appears as follows: MSACM.msgsm610=msgsm610.acm WaveMapper=msacm.drv VIDC.MSVC=msvidc.drv VIDC.RT21=indeov.drv VIDC.CVID=iccvid.drv VIDC.IV31=ir32.dll MSACM.msadpcm=msadpcm.acm MSACM.imaadpcm=imaadpcm.acm VIDC.MRLE=msrle.drv VIDC.YVU9=indeov.drv VIDC.IV32=ir32.dll 2. Find the [386Enh] section, and add the following lines if they are not already present: device=vshare.386 device=dva.386 3. Find the [mci] section, and add the following lines if they are not already present: AVIVideo=mciavi.drv MMMovie=mcimmp.drv Changes to the MPLAYER.INI File ------------------------------- Use a text editor to create or modify the following sections in the MPLAYER.INI file, which is located in the Windows directory. The sections should appear as follows: [Options] MMMovie=61 [Devices] MMMovie=286, Microsoft Multimedia Movie Player Changes to the ENCARTA.INI File ------------------------------- Use a text editor to create or modify the ENCARTA.INI file, which is located in the Windows directory. The section should appear as follows: [95Options] CodePath=C:\ENCARTA\ SpellFile=C:\ENCARTA\encart95.lex InstPath=C:\ENCARTA\ BookPath=X:\encyc95\ DateTable=X:\encyc95\ ShowTitleScreen=1 IntroPlaySounds=1 SaveWindowLayout=0 SetBookmarkOnExit=1 WordProcessor=C:\WINDOWS\write.exe JumpColor=255 DictPath=X:\encyc95\dict\ ShowInfo=1 Install Fonts ------------- The Encarta Setup program installs special fonts. Perform the following steps to install these fonts manually: 1. In the Microsoft Windows Control Panel, choose Fonts from the Settings menu. 2. Check the list of fonts for the following: Arial (TrueType) MS Reference 1 (TrueType) MS Reference 2 (TrueType) Phonetic Symbol (TrueType) If any of the above fonts are not in the list, note which ones and continue with step 3. 3. Choose the Add button. 4. In the Add Fonts dialog box, from the Directories list, select the C:\WINDOWS\SYSTEM subdirectory. 5. Select the missing fonts and then choose the OK button. NOTE: You can make multiple selections by holding down the CTRL key while you click each font. Register OLE Information ------------------------ 1. From the File menu in the Program Manager, choose Run. 2. Type the following commands, choosing OK after each line: "regedit x:\encarta\encarta.reg" (without the quotation marks) "regedit c:\windows\mplayer.reg" (without the quotation marks) "regedit c:\windows\system\cleanup.reg" (without the quotation marks) "regedit c:\windows\system\ole2.reg" (without the quotation marks) NOTE: If the operation is successful, the following message is displayed: Registration Info Editor Information in has been successfully registered in the registration database. Choose OK. Create the Encarta Program Group in Program Manager --------------------------------------------------- 1. In Program Manager, create a new group called "Microsoft Multimedia" (if it does not already exist). a. From the File menu in the Program Manager, choose New. b. Select New Program Group and choose OK. c. In the Program Group Properties dialog box, type "Microsoft Multimedia" (without the quotation marks) in the Description field and choose OK. 2. Create the following two items in the Microsoft Multimedia group. To create an item, choose New from the Program Manager File menu, then select Program Item and choose OK. Copy the information into the fields of the Program Item Properties dialog box, then choose OK: Item 1: Description: Microsoft Encarta '95 Command Line: C:\ENCARTA\ENCART95.EXE Item 2: Description: READ ME: Encarta Tips Command Line: WRITE.EXE X:\README.WRI Restart Windows --------------- After restarting, the manual installation is complete. Additional query words: kbhowto msn_encarta 1995 multi media multimedia multi-media wfw 3.10 3.11 ====================================================================== Keywords : Technology : kbOSWinSearch kbHomeProdSearch kbHomeMMsearch kbZNotKeyword6 kbEncartaEncycSearch kbEncarta1995 kbOSWin310 kbOSWin311 kbOSWin300 kbOSWin300a Version : :1995 editions; WINDOWS:3.x ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.