DOCUMENT:Q315111 06-AUG-2002 [homemm] TITLE :Encarta 2002/2003: Error Reading from File ... DWINTL PRODUCT :Microsoft Home Multimedia Titles PROD/VER:: OPER/SYS: KEYWORDS:kbimu ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Encarta Reference Library 2003 - DVD Edition - Microsoft Encarta Reference Library 2002 - DVD Edition ------------------------------------------------------------------------------- SYMPTOMS ======== When you try to install one of the Encarta Reference Library products listed at the beginning of this article, you may receive the following error message: Error reading from file: :\\DWINTL.DLL where represents the drive letter of your DVD drive and represents the path to the Dwintl.dll file. CAUSE ===== This issue can occur if your computer has Universal Disk Format (UDF) disabled. NOTE: Although UDF is not required to run the Encarta Reference Library DVD, some DVD-ROM drives may have problems reading some DVD-ROM discs if UDF is disabled. RESOLUTION ========== To resolve this issue, use the following methods in the order in which they are presented. Method 1: Troubleshoot CD-ROM Read Errors ----------------------------------------- Click the article number below to view the article in the Microsoft Knowledge Base: Q218617 How to Troubleshoot CD-ROM Read Errors If the steps in the article do not resolve the issue, proceed to the next method. Method 2: Enable UDF for DVD-ROM Drives --------------------------------------- To enable UDF for DVD-ROM drives, follow these steps: NOTE: Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps. 1. Click Start, click Run, type "msconfig" (without the quotation marks) in the Open box, and then click OK. 2. Click Advanced. 3. Click to clear the "Disable UDF File System" check box, and then click OK. 4. Click OK. When you are prompted to restart your computer, click Yes. When your computer restarts, UDF is disabled and you should be able to install Encarta Reference Library. NOTE: By default, UDF is enabled in Windows. Therefore, another program (such as CD-RW software) may not work correctly if you enable UDF. You may need to disable UDF again in order for the other program to work normally. Additional Troubleshooting Procedures ------------------------------------- Use the procedures described in this section to further troubleshoot this issue: Inspect the Disc: Remove the disc from the drive and inspect the disc for damage such as warping or large scratches. If the disc is damaged, contact the manufacturer regarding a replacement CD. If you experience problems with a DVD disc, ensure that you place the DVD in a DVD drive not a CD-ROM drive. Clean the Disc: To clean the CD-ROM or DVD-ROM, use a disc cleaning kit, or gently wipe the silver side of the disc with a soft, lint-free cotton cloth. Do not use a paper cloth because it can scratch the disc. Wipe the disc from the center, outward. Do not use a circular motion as this can scratch the disc. If this does not resolve the issue, clean the disc using a water-dampened cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly before you place it in the drive. Test the Disc in a Different Drive: If your computer has multiple CD-ROM, CD-R, CD/RW or DVD drives, test the disc in the other drive. For DVDs, ensure the drive bears a DVD logo on the front. If the disc works in another drive, the original drive may not be properly reading the disc. Please seek help from your computer or disc drive manufacturer. If the disc is clean and it does not work in another drive, it may be damaged and you may have to replace it. See the section "Obtaining a Replacement Disc" below. Clean the Drive: You can clean the disc drive using a CD-ROM or DVD drive cleaning disc, which are available in most computer or home electronics stores. Before you purchase a drive cleaning disc, try troubleshooting the issue using the remaining procedures that are described in this section. Test Disc Read with Copy or Xcopy: Copy and Xcopy are command-line utilities that will usually uncover a disc read issue. If Copy and Xcopy complete successfully, the issue is unlikely to be a problem reading the disc. A failure to copy can indicate drive or system problems and illustrate the need for further troubleshooting. To test disc read using Copy and Xcopy, follow these steps: 1. Click Start, and then click Run. 2. In the Open dialog box, type "cmd" (without the quotation marks), and then press ENTER. 3. At the prompt, type one of the following commands: - To copy a folder: "copy :\:\psstest /V " (without the quotation marks) - To copy the entire disk: "xcopy :\*.* :\psstest /V /E " (without the quotation marks) NOTE: is the drive letter of the CD-ROM or DVD drive, is the name of the folder containing files you need to access on the disk, and is the letter of your system hard disk drive 4. Press ENTER. 5. If you receive a "Does psstest specify a file name or directory name?" message, press F. 6. If you receive an "Overwrite ... (Yes/No/All)?" message, press A. NOTE: If you use the /V switch with Copy or Xcopy, the copied files are checked to make sure that the files were copied correctly. However, the task may take longer to complete if you use the /V switch. Quit Unnecessary Software: Software that is running on your computer may interfere with reading the disc, for example, antivirus software, firewall software, or anti-crash software. If you disable the unnecessary software, and then restart the computer, you may be able to read from the disc. For additional information about how to start Microsoft Windows XP without unnecessary software, click the article number below to view the article in the Microsoft Knowledge Base: Q310353 How to Perform a Clean Boot in Windows XP After you have performed a clean boot of Windows XP, close any remaining programs by following these steps: 1. Quit all open programs. 2. Right-click each icon in the notification area, and then click Exit. NOTE: The notification area is located at the far right of the taskbar, near the clock. Some programs listed in the notification area will not have Exit listed on the shortcut menu and you may need to click Quit, Close, or Disable depending on the choices available for that program. 3. Press CTRL+ALT+DEL, and then click Task Manager. 4. In Windows Task Manager, click Applications. 5. No programs should appear under the Task list. If any programs appear, click to select the program, and then click End Task. 6. Repeat step 5 until the Task list is empty. 7. Quit Windows Task Manager. Switch the Drive Controller to DMA Mode: If you switching the CD-ROM or DVD drive to DMA from PIO, you may resolve the issue. For additional information on how to switch your computer's drive controller to DMA mode, click the article number below to view the article in the Microsoft Knowledge Base: Q310751 MA/PIO Settings Are Hard to Find in Windows XP MORE INFORMATION ================ For additional information about problems installing Encarta Reference Library, click the article number below to view the article in the Microsoft Knowledge Base: Q248263 Error 1305 During Installation For additional information about troubleshooting DVD or CD-ROM issues, click the article numbers below to view the articles in the Microsoft Knowledge Base: Q314096 How to Troubleshoot CD-ROM Drive Problems in Windows XP Q308012 Resources for Troubleshooting DVD Problems in Windows XP Q306318 Troubleshooting DVD Playback in Windows Media Player for XP Q306319 How to Troubleshoot Audio CD Creation in Windows Media Player Q315350 Incorrect Function Err Msg When Accessing CD-ROM Drive Additional query words: 1305 dwintl.dll ====================================================================== Keywords : kbimu Technology : kbHomeProdSearch kbEncartaSearch kbMMSearch kbEncartaRef2002DVD Version : : Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.