DOCUMENT:Q130664 01-NOV-2001 [foxpro] TITLE :HOWTO: Use the Setup Wizard in Professional Visual FoxPro PRODUCT :Microsoft FoxPro PROD/VER:: OPER/SYS: KEYWORDS:kbsetup kbnokeyword kbvfp300 kbvfp500 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Visual FoxPro for Windows, Professional Edition ------------------------------------------------------------------------------- SUMMARY ======= This article discusses the steps followed by the Visual FoxPro Setup Wizard. The Professional Visual FoxPro Setup Wizard creates distribution disks from the files in your distribution tree. To learn about the distribution process and how to prepare your distribution tree before running the Setup Wizard, please see Chapter 10, "Creating Distribution Disks," in the Professional Features Guide. NOTE: The Setup Wizard is included only with the Professional Edition of Visual FoxPro. MORE INFORMATION ================ NOTE: If the Setup Wizard has never been run, an additional step occurs before Step 1 listed below. This additional, initial step asks for a directory to place compress file in. This directory cannot be the same as the root directory of your application. Step 1 - Distribution Tree -------------------------- The directory that you specify for your distribution tree must contain all files and subdirectories you want to create in a user's environment. The Setup Wizard uses this directory tree as the source for files that it will compress into the disk image directories. The Setup Wizard records the options you set for each distribution tree and uses them as default values the next time you create a setup routine from the same distribution tree. NOTE: You cannot use the DISTRIB directory that the Wizard creates as the directory for your distribution tree. Also, it is a good idea to place your source tree outside the Visual FoxPro directory. Step 2 - Optional Components ---------------------------- Select the system features your application uses and the operating systems on which users can install your application. The Setup Wizard will create a setup routine that includes all necessary system files for the system features you specify. The following table lists the sizes of files that could be included with your setup routine.

Select this option if Option Size your application... ----------------------------------------------------------------------- Visual FoxPro 3.0 Runtime 3.5 MB Requires the Visual FoxPro Runtime (Vfp300.esl) to execute. Microsoft 5.0 Graph Runtime 2.2 MB Includes forms that use Graph 5.0 controls. ODBC Drivers 3.5 MB Communicates with tables other than Visual FoxPro .dbf files. When you select this option, the ODBC Drivers dialog box appears so that you can select necessary drivers. ODBC Drivers (Win32s) 4.3 MB Communicates with tables other than Visual FoxPro .dbf files. When you select this option, the ODBC Drivers dialog box appears so that you can select necessary drivers. Win32S (1) 4.0 MB Is being distributed to users running Windows version 3.11. Visual FoxPro applications require Win32s. Windows 95 (1) 0.5 MB Is being distributed to users running Windows 95. Windows NT (1) 0.5 MB Is being distributed to users running Windows NT. (1) If you are distributing files other than Visual FoxPro applications, such as a Help file, you don't need to select a platform option. The sizes listed above represent the bytes used after the files have been installed on a user's hard disk. When the user runs the setup these sizes might be slightly exaggerated. Step 3 - Disk Images -------------------- The Setup Wizard creates a distribution subdirectory containing disk images for each disk type you specify. If you select the Netsetup option, the Setup Wizard creates a single directory to hold all the files. You can create the disk image directory before you run the Setup Wizard. If you want the Setup Wizard to create the directory for you, type a directory name in the text box. Step 4 - Setup Options ---------------------- The Setup Wizard creates installation dialog boxes with the title you specify in the Dialog Caption box. It also places the copyright statement in the About Setup dialog box that the user can access from the About command on the Setup application's control menu. Entries are required in the Dialog Caption and Setup Copyright boxes. The Post-Setup Executable entry is optional. NOTE: To advance to Step 5, you must ensure that the insertion point (mouse pointer) is not in the Dialog Caption or Setup Copyright box. Step 5 - Default Destination Directory -------------------------------------- The setup routine places your application in the directory you specify in the Default Destination Directory box. Step 6 - File Summary --------------------- NOTE: To create a Windows Program Item and icon for your application, you must select the PM Item option, providing the information described in the following table. The Setup Wizard lists your files in a grid. You can change the settings for any file by clicking the item you want to change. The following table describes the settings displayed in each column: Column Description ------------------------------------------------------------------------ File The file name as it will be created on the user's computer. Target Dir The file can be installed on the user's machine in the Application directory, Windows directory, or Windows System directory. PM Item If you select this option, the Wizard displays the Program Manager Item dialog box, so you can specify the program item properties (description, command line, and icon). In the command line, you can use an embedded %s sequence to replace the application directory. The "s" must be lowercase. Use the %s sequence when you install files in application subdirectories. This ensures that files are installed in the correct subdirectory if your users specify a name for the application directory other than the default name. The following example installs MYDATA.DBF in the MAINDATA subdirectory of the application directory: %s\MAINDATA\MYDATA.DBF If you specify an icon that is outside your source tree, the setup routine installs the icon in your application directory. OLE If you select this option, the generated setup registers the OLE control when it is installed on a user's computer. This does not register a design-time license for the control on the user's computer. It is a good idea to have your setup register OLE controls to ensure that your user always uses the correct version of the control. Visual FoxPro allows an OLE control to be created or instantiated only if the control and its license have been purchased and installed on your computer. License information is saved with the form or class. This allows distributed forms to run successfully on users' computers. Users cannot modify these forms in design-time unless they also purchase a design-time license from the manufacturer of the control. You may distribute visual class libraries that contain OLE controls. New controls based on these visual classes can be added to running forms. Users, however, may not modify these visual classes, create controls based on them, or subclass them. OLE controls may be developed and distributed without charge or licensing requirements. However, most are designed so that they fail without a license. There are currently two types of licenses for OLE controls, design-time and run-time. A design-time license allows you to create new OLE controls. A run-time license allows you to run a form that contains an OLE control. For more information about distributing applications with OLE controls, please see the "Distributing OLE Applications" topic in the Visual FoxPro Help file. Step 7 - Finish --------------- When you choose Finish, the Setup Wizard records the configuration for use the next time you create distribution disks from the same distribution tree. It then starts creating the application disk images. The Setup Wizard creates and compresses several unique files the first time it runs and saves them for subsequent runs. Therefore, the first run of the Setup Wizard takes longer than subsequent runs. After the Setup Wizard creates the disk images you specified, copy the images to master disks. Then copy and combine the disks with the rest of your distribution package. After you create a set of master disks, you can delete the disk image subdirectories. However, you should retain the COMPRESS subdirectory, so the next time you use the Setup Wizard, it only needs to compress files that have changed since creating the previous set of disks. The COMPRESS directory contains the same files that are in the source directory. The only difference is that they are compressed. If one of the files in the source directory has been changed, then the Setup Wizard will recompress it. Additional query words: ====================================================================== Keywords : kbsetup kbnokeyword kbvfp300 kbvfp500 Technology : kbVFPsearch kbAudDeveloper Version : : Issue type : kbhowto ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.