DOCUMENT:Q175173 10-AUG-1999 [foxpro] TITLE :HOWTO: Use Word to Print General Fields in Report Designer PRODUCT :Microsoft FoxPro PROD/VER: OPER/SYS: KEYWORDS:kbcode kbinterop kbAutomation kbDesigner kbvfp300 kbvfp500 kbvfp600 kbWord ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Visual FoxPro for Windows, versions 3.0, 3.0b, 5.0, 6.0 ------------------------------------------------------------------------------- SUMMARY ======= When using the Report Designer to print a general field that has text inserted into it with a word processor, the OLE bound Control object of the Report Designer has to be sized to be as large as the largest amount of text in the general fields. This can present problems if there are multiple pages of text in the general field. The OLE Bound control can be enlarged only to the height of a single page in the Report Designer, which is usually not large enough to print a general field that has more than a page of data. MORE INFORMATION ================ Using a memo field would be one way to store the data and have it print correctly in the Report Designer. The problem with this method is that any formatting such as underlining, bolding, or different font sizes of the text is not allowed in a memo field. A word processor is needed to format data in this way and storing it into a general field is the only way to keep the formatting of the data intact. Instead of using the Report Designer to print the general field, sending it to a word processor like Word for Windows will allow all of the data in a general field to be printed correctly. Below are two examples of code that use OLE Automation to call Word and then use WordBasic or Visual Basic for Applications (VBA) commands to pass the data to Word. The first example works only with Word 6.0 or Word 95 with any version of Visual FoxPro. The second example works only with Word 97 and Visual FoxPro versions 5.0 with Service Pack 2 and 6.0. If the error "OLE error code 0x80020005: Type Mismatch." occurs, then look at the following article in the Microsoft Knowledge Base: Q169565 Type Mismatch Using OLE Automation to Word 97 If using the example that works with Word 6.0 or Word 95 and the following error occurs, then the data in the general field of the table was inserted with Word 97: OLE Idispatch exception code 269 from Microsoft Word: Microsoft Word Err=1269 - Word cannot edit the object... Change to the second example using Visual FoxPro 5.0 SP 2 and Word 97 to pass the data to Word. To use the code as is, you need to create a table with field names like those below: Field Name Type Width ---------- --------- ----- FIRST Character 15 LAST Character 15 ADDRESS Character 25 CITY Character 15 STATE Character 2 ZIPCODE Character 5 GEN General 4 After building the table and adding some data to each character field, make sure that each general field has been populated by double-clicking on the general field to open it and selecting the EDIT - INSERT OBJECT menu options. With the "Create New" button selected, select "Microsoft Word Document" in the "Object Type" list box and type some data into Word. Close Word to save the data into the general field. The following code works with Visual FoxPro 3.x, 5.x, and 6.0 when using Word 6.0 or Word 95. Place the following code into a program (.prg) file and run it. ************* Beginning of code. **************** PUBLIC oWord oWord = CREATEOBJECT("Word.Basic") WITH oWord .AppShow && Makes Word Visible .FileNewDefault && Opens up blank Word document * The following Insert commands place the FoxPro fields into * the Word document. You can change these commands to place * any text in the document. * Ensure that the table is already open. If only a portion * of records are to be printed, change the EOF() to a certain * number so that all of the records do not get processed. * Example: DO WHILE RECNO() < 10 GO TOP DO WHILE NOT EOF() .Insert("Record: "+ALLTRIM(STR(RECNO()))) && The above line shows the record number. .InsertPara .InsertPara .Insert(ALLTRIM(first)+" "+last) && Field in the table. .InsertPara .Insert(address) .InsertPara .Insert(ALLTRIM(city)+", "+state+" "+zipcode) .InsertPara .InsertPara .Insert("Contents of the General Field:") .InsertPara .InsertPara KEYBOARD "{ctrl+c} {ctrl+w}" && Copies and closes the general && field to the clipboard. MODIFY GENERAL gen && This has to be after the && KEYBOARD command. .EditPaste .WordLeft(1,1) .EditObject("0") .EditSelectAll .Editcopy .FileClose .EditClear .EditPaste .InsertPara .InsertPara .InsertPara SKIP && Move the record pointer to && the next record. ENDDO .FileSaveAs("c:\mydoc.doc") && Saves the Word document as && Mydoc.doc. .FilePrint ENDWITH .AppClose **************** End of code. **************** If you are using Word 97, Visual FoxPro 5.0 Service Pack 2 and Visual FoxPro 6.0 are the only versions that run this code correctly. Place the following code into a program (.prg) file and run it. **************** Beginning of code. ********** PUBLIC oWord oWord = CREATEOBJECT("Word.Application") WITH oWord .visible=.t. && Makes Word Visible .documents.add && Opens up blank Word document * The following Insert commands place the FoxPro fields into * the Word document. You can change these commands to place * any text in the document. * Ensure that the table is already open. If only a portion * of records are to be printed, change the EOF() to a certain * number so that all of the records do not get processed. * Example: DO WHILE RECNO() < 10 GO TOP DO WHILE NOT EOF() .Selection.TypeText("Record: "+ALLTRIM(STR(RECNO()))) && The above line shows the record number. .Selection.TypeParagraph .Selection.TypeParagraph .Selection.TypeText(ALLTRIM(first)+" "+last)&& Field in the table. .Selection.TypeParagraph .Selection.TypeText(address) .Selection.TypeParagraph .Selection.TypeText(ALLTRIM(city)+", "+state+" "+zipcode) .Selection.TypeParagraph .Selection.TypeParagraph .Selection.TypeText("Contents of the General Field:") .Selection.TypeParagraph .Selection.TypeParagraph KEYBOARD "{ctrl+c} {ctrl+w}" && Copies and closes the general && field to the clipboard. MODIFY GENERAL gen && This has to be after the && KEYBOARD command. .Selection.Paste .Selection.MoveLeft x = .ActiveDocument.Shapes.Count .ActiveDocument.Shapes(x).OLEFormat.Edit .Selection.Wholestory .Selection.Copy .ActiveDocument.Close .Selection.Delete .Selection.EndKey(6) .Selection.Paste .Selection.TypeParagraph .Selection.TypeParagraph .Selection.TypeParagraph SKIP && Move the record pointer to ENDDO .ActiveDocument.SaveAs("Mydoc.doc") && Saves the Word document as && Mydoc.doc. .Application.PrintOut ENDWITH .Quit **************** End of code **************** REFERENCES ========== For more information on Word Basic and Visual Basic Applications (VBA), look in the Word Help file. Additional query words: OLE Word ====================================================================== Keywords : kbcode kbinterop kbAutomation kbDesigner kbvfp300 kbvfp500 kbvfp600 kbWord Technology : kbVFPsearch kbAudDeveloper kbVFP300 kbVFP300b kbVFP500 kbVFP600 Issue type : kbhowto ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.