DOCUMENT:Q145676 11-JAN-2001 [vbwin] TITLE :PRB: Registry Overwritten with Same ProgID/Different Bitness Ser PRODUCT :Microsoft Visual Basic for Windows PROD/VER:WINDOWS:4.0 OPER/SYS: KEYWORDS:kbRegistry kbVBp kbVBp400 kbGrpDSVB kbDSupport ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Visual Basic Standard Edition, 32-bit, for Windows, version 4.0 - Microsoft Visual Basic Professional Edition, 16-bit, for Windows, version 4.0 - Microsoft Visual Basic Professional Edition, 32-bit, for Windows, version 4.0 - Microsoft Visual Basic Enterprise Edition, 16-bit, for Windows, version 4.0 - Microsoft Visual Basic Enterprise Edition, 32-bit, for Windows, version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== On a single machine, developing and using 16-bit and 32-bit OLE servers that provide objects with the same ProgID may cause problems if no compatible server is specified. Some registry entries will point only to the last server registered and only this server may be accessible from OLE Automation clients. This article illustrates why this behavior occurs, and also explains how to avoid this problem. RESOLUTION ========== If development of both 16-bit and 32-bit servers is done on the same machine, this problem can be avoided by specifying a compatible server for your OLE server project. If a compatible server exists, the CLSID from the compatible server will be used when any new executable is created. In the above scenario, this means that only one key CLSID will be used for the server. Instead of one CLSID possessing a LocalServer key and another containing a LocalServer32 key, both LocalServer and LocalServer32 keys will exist beneath the same CLSID. When more than one server is listed beneath a CLSID, OLE has a predefined order that is used to determine which server is used to provide the object. MORE INFORMATION ================ Two of the most important keys that are created by registration of an OLE server are a ProgID key and a CLSID key. The ProgID is created immediately beneath the HKEY_CLASSES_ROOT predefined key and consists of the ProjectName.ClassName for a Visual Basic OLE server. The single key created beneath this ProgID key is named CLSID; its value is a 64-bit number that is used by OLE to uniquely identify the particular object. In addition to the ProgID and file extension keys off of HKEY_CLASSES_ROOT, there is also a key just named CLSID. Expanding this key will show subkeys for each CLSID that is registered on the machine. There will be a key with the same 64-bit number associated with the ProgID in this section. Keys underneath this individual CLSID hold information that OLE uses to access the server. When classes provided by a 32-bit out-of-process (EXE) OLE server are registered, two of the keys created beneath the CLSID for each class are named LocalServer32 and InprocHandler32. Registration of a 16-bit server causes the creation of LocalServer and InprocHandler keys. The InprocHandler key specifies the OLE DLL to be used by the client for communication with the server. The DLL used by local Visual Basic OLE servers is OLE2.DLL on 16-bit machines, and OLE32.DLL on 32-bit Windows operating systems. The LocalServer(32) key contains the path and filename of the executable for the server. With an out-of-process server created with Visual Basic, this will be the executable generated by Visual Basic. The problem addressed by this article occurs when 16-bit and 32-bit versions of an OLE server are registered and provide objects with the same ProgID but different CLSIDs. This can easily happen if, for example, a 16- bit OLE server project is loaded into the 32-bit version of Visual Basic and a new 32-bit executable is created. Starting with a fresh machine, registering (via compilation perhaps) a 32-bit server will create these registry entries (among others): HKEY_CLASSES_ROOT\ProjectName.ClassName HKEY_CLASSES_ROOT\ProjectName.ClassName\CLSID = and HKEY_CLASSES_ROOT\CLSID\ HKEY_CLASSES_ROOT\CLSID\\LocalServer32 Where LocalServer32 points to the 32-bit executable. If a client requests an object of ProjectName.ClassName, the 32-bit EXE will be started and used to provided the object. Now suppose a 16-bit server is now registered with the same ProgID of ClassName.ProjectName. The registry will contain these relevant entries (where the ones marked with asterisks are new or modified): HKEY_CLASSES_ROOT\ProjectName.ClassName *HKEY_CLASSES_ROOT\ProjectName.ClassName\CLSID = and *HKEY_CLASSES_ROOT\CLSID\ *HKEY_CLASSES_ROOT\CLSID\\LocalServer HKEY_CLASSES_ROOT\CLSID\ HKEY_CLASSES_ROOT\CLSID\\LocalServer32 If a client now requests an object of ProjectName.ClassName, OLE will look up the ProgID and use the value of the CLSID beneath the ProgID to determine what object to create. This value is now the CLSID for the 16- bit server, so the server that will be started to provide the object will be the EXE pointed to by the LocalServer key of the new CLSID that was added by the registration of the 16-bit server. Furthermore, if the 16-bit server is now unregistered, not only will the newly added CLSID keys be removed, but the ProgID key will be removed also. At this point the 32-bit server will be unable to provide objects, despite the fact that it has not been unregistered. Because the ProgID key is gone, the CLSID keys that the 32-bit server added are orphaned and OLE has no way to access them. Reregistering the 32-bit server will add the correct ProgID and enable the 32-bit server to again provide objects. Steps to Reproduce ------------------ 1. Start Visual Basic 4.0, 16-bit. Form1 is created by default. 2. From the Insert menu, choose 'Class Module' to add a new class module to the project. 3. Change these properties of the new class module: Instancing: 2 - Creatable Multiuse Name: TestClass Public: True 4. Add this single line of code to the General Declarations section of the TestClass module: Public MyVar As Integer 5. Open the Options dialog by selecting Options from the Tools menu. Switch to the Project tab, and change the 'Project Name:' text box from 'Project1' to 'Test1632'. This changes the first part of the ProgID to 'Test1632'. 6. Choose 'Save Project' from the File menu to save the project files. 7. Again from the File menu, select 'Make EXE File' to compile (and register) the 16-bit OLE server. This will create a key off of HKEY_CLASSES_ROOT named 'Test1632.TestClass' and a corresponding CLSID key beneath HKEY_CLASSES_ROOT\CLSID. 8. Close the 16-bit version of Visual Basic and start the 32-bit version of Visual Basic 4.0. 9. Open the Registry Editor (REGEDIT on Windows 95 Windows, or REGEDT32 on Windows NT). Starting from HKEY_CLASSES_ROOT, find the 'Test1632.TestClass' key. Expand this key and make note of the CLSID. If you like, you can do a search on this CLSID and find the relevant LocalServer key pointing to the filename selected in step 7 above. 10. Select 'Open Project' from the file menu and open the project created in steps 1-8. 11. Choose 'Make EXE File' from the File menu, change the filename of the executable so that we will have 16- and 32-bit versions of the same server, and choose OK. 12. Switch back to the Registry Editor and do a refresh. Find the 'Test1632.TestClass' ProgID again, expand it, and notice that the CLSID is different than the one seen in step 7. Finding this new CLSID and observing the keys beneath will show that a LocalServer key does not exist but that a LocalServer32 key does. Additional query words: ====================================================================== Keywords : kbRegistry kbVBp kbVBp400 kbGrpDSVB kbDSupport Technology : kbVBSearch kbAudDeveloper kbVB400Search kbVB400 kbVB16bitSearch Version : WINDOWS:4.0 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.