DOCUMENT:Q196208 20-MAY-2002 [vbwin] TITLE :INFO: DCOM98 Release Notes PRODUCT :Microsoft Visual Basic for Windows PROD/VER::6.0 OPER/SYS: KEYWORDS:kbsetup kbtophit kbDCOM kbOSWinNT kbRegistry kbVBp600 kbVS600 kbOSWin95 kbGrpDSVB ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Visual Basic Learning Edition for Windows, version 6.0 - Microsoft Visual Basic Professional Edition for Windows, version 6.0 - Microsoft Visual Basic Enterprise Edition for Windows, version 6.0 ------------------------------------------------------------------------------- SUMMARY ======= DCOM98 is installed by the Visual Basic installation program. Visual Basic and some applications created in Visual Basic require DCOM98 to be installed in order for some components to run properly. DCOM98 extends support for DCOM (Distributed Component Object Model) for Microsoft Windows 98 and Microsoft Windows 95. DCOM98 is not required for Windows NT and Windows 2000 systems; DCOM is an intrinsic part of the Windows NT and Windows 2000 operating systems. This article contains the DCOM98 Release Notes. MORE INFORMATION ================ The release notes are only available after DCOM98 has been installed. After DCOM98 is installed, the release notes may be found at the following location: \Windows\System\Dcom98\relnotes.txt DCOM98 is also available on Disk 1 of the Visual Basic installation CD-ROM in the DCOM98 folder. For more information about the two files in this folder, please see the Release Notes below. DCOM98 Release Notes: DCOM98 extends support for DCOM for Microsoft Windows 98 and Microsoft Windows 95. Please note the following instructions, guidelines, and features new to this release of COM and OLE functionality for Windows 95 and Windows 98. Distributed COM (DCOM) extends the Component Object Model (COM) infrastructure, transparently and naturally adding support for reliable, secure, and efficient communication between COM components, such as ActiveX Controls, scripts, and Java applets residing on different computers in a LAN, a WAN, or on the Internet. With DCOM, your application can be distributed across locations that make the most sense to your customer and to the application. For more in-depth information, please read the DCOM Technical overview, available on the Microsoft COM Home Page at: http://www.microsoft.com/com/ Contents -------- I. Installation Notes a. Downloading and Extracting DCOM98 b. International Version c. Before You Install DCOM98 d. Uninstalling DCOM98 II. Release Notes a. What's New in DCOM98 b. Bug Fixes in DCOM98 c. Known Issues d. DCOM98 File List III. Developer Notes a. What's New in DCOM98 b. Bug Fixes in DCOM98 Affecting Developers c. Known Issues Affecting Developers d. Differences from DCOM on Windows NT e. Redistributing DCOM98 f. Support & Resources I. INSTALLATION NOTES --------------------- A. Downloading and Extracting DCOM98: If you have downloaded this release of DCOM98 from a Web site, you should read the release notes completely before you extract and install DCOM98. After downloading DCOM98, you will have one or two compressed executable files on your hard drive: - DCOM98.EXE contains the COM system DLLs - DCM98CFG.EXE contains the DCOM Configuration utility To extract either file and begin the installation process, type the file name at the Command Prompt or double-click the file from Windows Explorer. After running DCOM98.EXE, you will be prompted to reboot your system to complete the installation. Your existing OLE and COM system components will be saved to allow you to uninstall DCOM98 if necessary. If you run these programs on any version of Windows NT, no system components will be overwritten. You may be asked to reboot your system in order for changes to take effect; this is not necessary, as nothing as been changed. B. International Version: DCOM98 can be installed over any localized version of Windows 95 or Windows 98. DCOM98 does not include the OLE Common Dialogs (OLEDLG.DLL), which is the only portion of DCOM98 requiring localization. Note that the end-user license agreement (EULA), release notes, and setup prompts have not been localized. When you run DCOM98.EXE on a localized version of Windows, standard Windows buttons will be localized, but the remaining prompts will not. In addition, the DCOM Configuration utility, DCM98CFG, is only provided in English in this Web release. The program will work correctly on localized versions of Windows 95 and Windows 98. However, the instructions will only appear in English. C. Before You Install DCOM98: The DCOM98 installation program updates your system DLLs. We recommend that you save all open documents and close all programs before installing DCOM98. D. Uninstalling DCOM98: NOTE: We recommend caution when uninstalling DCOM98 because other applications may depend on the functionality it provides. To make it less likely that DCOM98 would be removed inadvertently, the "DCOM" entry has been removed from the "Add/Remove Programs" applet. However, it may still be uninstalled through the command line. If you are certain that you want to uninstall DCOM98, from a command line, cd to windows\system\dcom98\oldole. Type "uninstall" and follow the instructions provided. You will have to reboot to complete the uninstall. When you uninstall, the uninstalled files are not deleted automatically, but you may safely delete them if you choose to. Note that if a version of Microsoft Internet Explorer that depends on DCOM is installed on a Win95 machine, you will not be able to uninstall DCOM unless you've uninstalled Internet Explorer first. II. RELEASE NOTES ----------------- A. What's New in DCOM98: This section lists the major new features of DCOM98 that are visible to end-users and administrators. Additional features for developers are described in the Developer Notes below. Replacing DCOM98 with Older Version Prohibited: In previous releases of DCOM95, you could replace a newer version of DCOM95 with an older version of DCOM95. DCOM98 now checks version numbers on installation and does not allow you to install an older version on top of a newer version. This change will avoid problems with incompatible versions of DLLs. Visual Studio 6.0 Process Monitoring Support: In support of Visual Studio 6.0, DCOM98 provides monitoring information for developers to help them understand the behavior, performance, and structure of their application. If you are using Visual Studio Analyzer, you should always use DCOM98. New Directory Created by Setup: Setup creates a directory called DCOM98 under your system directory. The EULA, etc. are stored there. Setup also creates a directory under that called OLDOLE, into which the old DCOM95 or OLE binaries are backed up. These files get used if you later uninstall. COM Internet Services: The COM Internet Services (CIS) enable clients and servers to be connected over the internet using COM. The COM Internet Services consist of: - a new DCOM protocol, Tunneled TCP - a new moniker type, OBJREF moniker - a new CISCNFG utility For Windows 95 or Windows 98 CIS client support, install DCOM98; install DCOM98CFG as described above. Then use the CISCNFG tool (which is installed when you install the DCOM configuration utility) to change the registry key that defines which protocol to use for remote processes. From a command line, type: ciscnfg where is: rpc to use RPC http to use HTTP tcp_http to try TCP first, and, if the server times out, try HTTP. Typing "ciscnfg" with no argument provides usage information. No SDK updates are required to use the Tunneled TCP protocol. There are a few updates for OBJREF monikers. CreateObjrefMoniker: Creates an OBJREF moniker based on a pointer to an object: WINOLEAPI CreateObjrefMoniker( LPUNKNOWN pUnk, //Pointer to the object LPMONIKER *ppMk //Address of pointer to OBJREF moniker ); Parameters: pUnk: Pointer to the IUnknown interface on the object that the moniker is to represent. ppMk: Address of a pointer to the IMoniker interface on the OBJREF moniker created. Return Values: This function supports the standard return values E_OUTOFMEMORY and E_UNEXPECTED, as well as the following: S_OK: The OBJREF moniker was successfully created. Remarks: Clients use OBJREF monikers to obtain a marshaled pointer to a running object in the server's address space. The server typically calls CreateObjrefMoniker to create an OBJREF moniker and then calls IMoniker::GetDisplayName, and finally releases the moniker. The display name for an OBJREF moniker is of the form: OBJREF:nnnnnnnn where nnnnnnnn is an arbitrarily long base-64 encoding that encapsulates the computer location, process endpoint, and interface pointer ID (IPID) of the running object. The display name can then be transferred to the client as text. For example, the display name can reside on an HTML page that the client downloads. The client can pass the display name to MkParseDisplayName, which creates an OBJREF moniker based on the display name. A call to the moniker's IMoniker::BindToObject method then obtains a marshaled pointer to the running instance on the server. For example, a server-side COM component contained in an Active Server Page can create an OBJREF moniker, obtain its display name, and write the display name to the HTML output that is sent to the client browser. A script that runs on the client side can use the display name to get access to the running object itself. A client-side Visual Basic script, for instance, could store the display name in a variable called strMyName and include this line: objMyInstance = GetObject(strMyName) The script engine internally makes the calls to MkParseDisplayName and IMoniker::BindToObject, and the script can then use objMyInstance to refer directly to the running object. If the running object uses static IPIDs and the server process always runs on the same computer at a well-known endpoint, the display name of the OBJREF moniker will always be the same. In that case, the server can store the display name instead of calculating it each time it receives a request for the object. IMoniker - OBJREF Moniker Implementation: OBJREF monikers represent a reference to an object instance that is running on an out-of-process server, either locally or remotely. The moniker identifies the object instance and the computer the object is running on. An OBJREF moniker is similar in many ways to a pointer moniker, except that the running object is out-of-process. A client can call IMoniker::BindToObject on an OBJREF moniker and use the pointer it obtains to access the running object, regardless of its location. An important distinction from a pointer moniker is that the display name of an OBJREF moniker can be embedded in an HTML page, and the running object represented by the moniker can be bound by a client script, applet, or ActiveX control. When to Use: The primary use for an OBJREF moniker is to obtain access to a running object instance over the Internet. An active server page or some other means of generating dynamic HTML content places the display name of an OBJREF moniker in a parameter to an applet or an ActiveX control. The code of the applet or control calls CreateObjrefMoniker to create an OBJREF moniker based on the display name, and it then calls IMoniker::BindToObject on the resulting OBJREF moniker to get access to the running object instance. The active server page then marshals a pointer to the running object back to the page's client. Remarks: IMoniker::BindToObject - For OBJREF monikers, the pmkToLeft parameter must be NULL. Because the OBJREF moniker represents a running object, no activation takes place. If the represented object is no longer running, BindToObject fails with E_UNEXPECTED. IMoniker::BindToStorage - This method obtains a marshaled pointer to the requested interface on the storage that contains the running object. Because the OBJREF moniker represents a running object, no activation takes place. If the represented object is no longer running, BindToStorage fails with E_UNEXPECTED. IMoniker::Reduce - This method returns MK_S_REDUCED_TO_SELF and passes back the same moniker. IMoniker::ComposeWith - If pmkRight is an anti-moniker, the returned moniker is NULL. If pmkRight is a composite whose left-most component is an anti-moniker, the returned moniker is the composite with the left-most anti- moniker removed. If pmkRight is neither an anti-moniker nor a composite moniker whose left-most component is an anti-moniker, then the method checks the fOnlyIfNotGeneric parameter. If it is FALSE, the method combines the two monikers into a generic composite; if it is TRUE, the method sets *ppmkComposite to NULL and returns MK_E_NEEDGENERIC. IMoniker::Enum - This method returns S_OK and sets ppenumMoniker to NULL. IMoniker::IsEqual - This method returns S_OK if *pmkOther is an OBJREF moniker and the paths for both monikers are identical (using a case- insensitive comparison). Otherwise, the method returns S_FALSE. IMoniker::Hash - This method calculates a hash value for the moniker. IMoniker::IsRunning - Because OBJREF monikers represent a running object instance, this method returns TRUE unless the object is known to be no longer running because a recent call failed. The method ignores pmkToLeft. IMoniker::GetTimeOfLastChange - This method returns E_NOTIMPL. IMoniker::Inverse - This method returns an anti-moniker (such as the results of calling CreateAntiMoniker_com_CreateAntiMoniker). IMoniker::CommonPrefixWith - If the two monikers are equal, this method returns MK_S_US and sets *ppmkPrefix to NULL. If the other moniker is not an OBJREF moniker, this method passes both monikers to the MonikerCommonPrefixWith function. This function correctly handles the case where the other moniker is a generic composite. If there is no common prefix, this method returns MK_E_. IMoniker::RelativePathTo - This method returns E_NOTIMPL. IMoniker::GetDisplayName - This method obtains the display name for the OBJREF moniker. The display name is a 64-bit encoding that encapsulates the machine location, process endpoint, and interface pointer ID (IPID) of the running object. For future compatibility, the display name is restricted to characters that can be specified as part of a URL. IMoniker::ParseDisplayName - If pmkToLeft is not NULL, this method returns MK_E_SYNTAX. IMoniker::IsSystemMoniker - This method returns S_OK and passes back MKSYS_OBJREFMONIKER. B. Bug Fixes in DCOM98: This section describes bugs fixed in DCOM98 that affected applications running on Windows 95 with DCOM95 1.1 installed. Additional bug fixes are described in the Developer Notes section below. Race Condition When Unloading Multiple Modules: When multiple modules were unloaded simultaneously, a race condition would occur in DCOM95 v1.1. Depending upon the order in which the modules were unloaded, an access violation could result. This has been corrected in DCOM98. Desktop Unresponsive During RPC Protocol Negotiations: While DCOM95 negotiated RPC protocols, it didn't dispatch messages. In certain cases, if the user launched another application during the time that RPC protocols were being negotiated, the machine would appear to be unresponsive. After 30 seconds, processing of messages would resume. In DCOM98 this has been changed, and applications can be launched while RPC protocols are being negotiated. Desktop Unresponsive When New Application Launched: RPC creates a hidden window that doesn't dispatch messages. When a user launches a new application from the desktop, Windows sends a message to all other window handles, notifying them of this event, and expecting a reply. The hidden RPC window would not reply, and Windows would hang (for 30 seconds in Windows 98; forever in Windows 95). DCOM98 fixes this problem, and the RPC window no longer makes the desktop unresponsive when new applications are launched. Multiple IP Addresses Heap Corruption: In certain situations, if you were running DCOM95 v1.1 on a machine with more than one IP address, the IP address buffer would be overrun and the heap would be corrupted. This has been fixed in DCOM98. Only First IP Address Used: If you were running DCOM95 v1.1 on a machine that had two network adapter cards (such as two IP addresses, each assigned to a different address card), DCOM95 v1.1 would use just one network adapter. In DCOM98, if the first one tried doesn't work, the second one will be used. RPC Now Tries Multiple IP Addresses: When doing a remote procedure call to a machine with multiple IP addresses, subsequent IP addresses will now be tried if connecting to the first one fails. C. Known Issues: This section describes known problems in DCOM98 that affect applications running on Windows 95 with DCOM98 installed. Additional issues are described in the Developer Notes section below. Corel WordPerfect Suite 7: Installation Causes Invalid Page Fault: If you install Corel WordPerfect Suite 7 on a Windows 95 system running DCOM98, you may get an invalid page fault in PfOd70.pfc during installation. If this error appears, just close the error message dialog box. Setup should continue successfully. Microsoft Access95: Database Replication Does Not Work: If you try to replicate an Access database using Microsoft Access 95 on machines with DCOM98 installed, you may get the following error message: "Microsoft Access cannot complete this operation because it can't find or initialize the dynamic-link library Msjtrclr." This is a problem in Access95. You may work around this issue by writing a program that uses the Access object model rather than the replica tool, or by using the briefcase for replication. Microsoft Access 97 is not affected by this issue. WordPerfect: If you have a WordPerfect document containing an embedded Corel spreadsheet, and the spreadsheet contains another embedded object (such as a bitmap), you may get a warning dialog saying you've lost the network connection when you close the innermost object. There may be four or five such warnings. All these warnings are benign. Just close them and continue. D. DCOM98 File List: This table lists the version numbers of files distributed with DCOM98: oleaut32.dll 2.30.4261 secur32.dll 4.10.1999 compobj.dll 2.3.1 ole2.dll 2.3.1 ole32.dll 4.71.2512 olecnv32.dll 4.71.2512 olethk32.dll 4.71.2512 rpcltc1.dll 4.71.2512 rpcltc5.dll 4.71.2512 rpcltccm.dll 4.71.2512 rpclts5.dll 4.71.2512 rpcltscm.dll 4.71.2512 rpcns4.dll 4.71.2512 rpcrt4.dll 4.71.2512 rpcss.exe 4.71.2512 storage.dll 2.3.1 stdole2.tlb 2.30.4261 stdole32.tlb 2.1 imagehlp.dll 4.00 dllhost.exe 4.71.2512 comcat.dll 5.0 iprop.dll 4.00 rpcmqcl.dll 4.71.2512 rpcmqsvr.dll 4.71.2512 olepro32.dll 5.0.4261 asycfilt.dll 2.30.4261 This table lists the version numbers of files distributed with DCM98CFG: mfc40.dll 4.1.6139 msvcrt40.dll 4.21.0000 dcomcnfg.exe 5.00.1601.0 oledlg.dll 1.0 ciscnfg.exe 4.71.2424 III. DEVELOPER NOTES A. What's New in DCOM98: Support for VB6.0 Data Types - Visual Basic 6.0 allows Visual Basic variants to contain user-defined data structures. DCOM98 supports remoting of these variants. B. Bug Fixes in DCOM98 Affecting Developers: This section lists additional bug fixes in DCOM98 which are not likely to affect end-users, but which developers or testers might encounter. File Monikers Support Additional Path Syntax: File monikers can now be created out of arguments of the form as in "C:\bug\bug\..\..\food.jpg." In DCOM95 v1.1, only relative paths (such as "..\..\food.jpg") or absolute paths (such as "C:\test.jpg") were permitted. GP Fault When Oleaut32.dll Unloaded: In DCOM95 v1.1, a General Protection fault would occur when Oleaut32.dll was unloaded before calling CoUnInitialize. This would most often occur when a Visual Basic application created a control statically linked to Oleaut32.dll, and then freed the control prior to calling CoUnInitialize. This no longer causes a general protection fault in DCOM98. Visual Basic Type Marshalling and Unmarshalling: The marshalling and unmarshalling of certain Visual Basic data types has been fixed. Array parameters with a size greater than 64K are now allowed. Structures defined using aliases to the type are now marshalled and unmarshalled correctly. Atoms Being Deleted Too Many Times in OleUninitialize(): This bug appeared in applications that called OleInitialize and OleUninitialize multiple times. During initialization, OLE adds many atoms for DDE RPC. If the atoms have already been added by another thread, they are not added again. However, during uninitialization, atoms were always deleted and the handles were not nullified. Therefore, the next time OleInitialize ran, the old handles would still exist, even though the atoms were long gone, and OLE wouldn't add them again. This led to all OLE atoms being invalid after multiple calls to OleInitialize and OleUninitialize. This problem has been fixed in DCOM98. ADO Servers Not Shutting Down Properly: Active Data Objects (ADOs) use point monikers to start a server process. DCOM95 v1.1 contained a bug involving point moniker reference counting, whereby point monikers were created with an initial reference count of 1 (rather than 0). Therefore, the reference count of the point moniker would never get to zero, and the point moniker would never be freed. This led to ADO servers never shutting down, even after the last pointer to it had been released. This has been fixed in DCOM98. CoCreateInstance Works With Own DNS Name: In DCOM95 v1.1, calling CoCreateInstance with the fully-qualified name of the local machine didn't work. This has been fixed in DCOM98, and CoCreateInstance now correctly creates an instance on the local machine. C. Known Issues Affecting Developers: MTA Clients That Use BSTR Conversion Routines May Block DDE Messages: OLE Automation BSTR conversion routines (such as BstrFromR4) create hidden windows to facilitate the type conversion. These windows do not service the Windows message queue. If such a window is created from within a Multi- Threaded Apartment client, DDE messages may be blocked. The client thread has no obligation to service the message queue under the MTA programming model. If it does not, this top-level window causes global broadcast messages to block. There are two ways to work around this situation: either call the BSTR conversion routines from within an STA client, or make the client's MTA thread behave like a Single-Threaded Apartment thread. (That is, it must service the message queue.) If it is blocking on a win32 handle, it must call the MsgWaitForMultipleObjects() API to simultaneously dispatch windows messages. D. Differences from DCOM on Windows NT: Security Capabilities of DCOM98: The core functionality and application programming interfaces (APIs) new to Distributed COM are identical in both Windows 95/98 (DCOM98) and Windows NT 4.0/5.0. However, certain capabilities related to security are different because of the different security infrastructures of the operating systems. Using the default security settings of the system is recommended; it is also necessary to enable "user-level" security on file-system shares (see below). The following services, which can be used to override default security, are available: - CoInitializeSecurity - CoQueryAuthenticationService - CoQueryProxyBlanket - CoSetProxyBlanket - CoQueryClientBlanket - IClientSecurity Interface - IServerSecurity Interface However, certain capabilities that are part of DCOM for Windows NT will not be available on Windows 95 or Windows 95 because of differences in the security infrastructure on Windows 95 and Windows 98. In particular, the lack of Win32 security APIs, such as the ability to create Access Control Lists (ACLs), and the AccessCheck function, as well as the lack of a security context associated with thread- and process- tokens, should be taken into account. Windows 95 and Windows 98 do not natively support these APIs or constructs. Because of this, DCOM98 will not support impersonation (specifically, the CoImpersonateClient and CoRevertToSelf helper functions over the IServerSecurity interface), which is based on thread- and process-token security in Windows NT 4.0. Impersonation is commonly used to automatically control access to restrictable system resources such as the file system, other processes, and the network. These resources are not restrictable on Windows 95 or Windows 98. DCOM98 does, however, offer programmers various helper objects to provide access-control-list and access-check functionality, which can be used to explicitly control access by remote clients to both system and user-defined resources or data. These helper objects are provided by the system object CLSID_DCOMAccessControl, which implements the IAccessControl interface. IAccessControl should be used to manage security permissions programmatically wherever portability between Windows 95 or Windows 98 and Windows NT is a concern. The CLSID_DCOMAccessControl object is available in all releases of DCOM95 and DCOM98 and in Windows NT 4.0 SP2 or later. Please see the Platform SDK documentation for more information about IAccessControl. Launch and Access Security: "Launch security," or controlling who can launch server-class code, is not provided in DCOM98 because launching servers is not supported. Servers/Classes must already be running in order for remote clients to connect and make use of their services. DCOM98 does support the ability to connect to already running classes/servers. "Access security" is supported via the \APPID\{.}\AccessPermissions registry key and adjusted via the DCOMCNFG tool or during installation or setup of the server code. Unauthenticated users will be able to use servers if you configure the class to support unauthenticated connections (through static configuration tools or dynamically via the CoInitializeSecurity function) and you can also build arbitrary access-control lists to define which users and groups can access specific services. Authentication Levels: DCOM98 clients can make DCOM calls using any authentication level. DCOM98 servers (or clients receiving callbacks) can only accept DCOM calls using RPC_C_AUTHN_LEVEL_NONE or RPC_C_AUTHN_LEVEL_CONNECT authentication levels. Transports: DCOM98 only supports TCP connectivity. If you do not have the TCP/IP protocol installed, DCOM95 will not be able to support cross-machine COM. Registry Settings: The following registry keys found under HKEY_LOCAL_MACHINE\Software\Microsoft\OLE are established by DCOM98and enables Distributed COM on this computer: EnableDCOM (default value = "Y") When set to "N," the computer is prevented from connecting to or activating objects on remote computers, and remote computers are unable to connect to objects on the local computer. Setting this value to "Y" enables either connectivity as a client to remote objects (when EnableRemoteConnect='N', see below), or full client/server connectivity (when EnableRemoteConnect='Y', see below). EnableRemoteConnect (default value = "N") Enables COM servers to act as DCOM servers. When this value is set to "Y," references to interfaces on local objects can be passed to remote clients, and remote clients are allowed to connect to running objects. When this value is set to "N," this machine is allowed to connect to remote objects but cannot act as a server; that is, the computer is prevented from connecting to running objects. In addition, the following registry key is found under HKEY_CLASSES_ROOT\CLSID: {bdc67890-4fc0-11d0-a805-00aa006d2ea4}\InstalledVersion and contains the version number of DCOM98, in the format "a,b,c,d." This value can be used by Internet Component Download to determine whether DCOM98 is installed. This value is added to the registry during setup, and should not be modified. Using Windows 95 as a DCOM Server Host: Windows 95 can be a DCOM server host with the following caveats: 1. There is no launch capability, which means the DCOM server process must already be running for a client to connect to it. 2. If secure connections are needed, then the server (and in the case of callbacks, the client) must have user-level access control with the name of a security provider set. 3. The registry value "EnableRemoteConnect" must be set to "Y." DCOM98 has been tested most extensively using the Windows NT Domain security provider. You may encounter problems using other security providers. To establish user-level access control, you must have FILESEC.VXD installed. This is generally installed on Windows 95 machines by installing File and Print Sharing. To enable user-level access control, launch the Network control panel applet, choose the "Access Control" tab, select the box marked "User-level access control," and enter the name of your security domain. This may affect the way you currently share directories on the network from your computer; see the Online documentation for details. If you do not have an "Access Control" tab in your network configuration control panel, you need to install a network client service. See the "Network clients, setting up" Help topic in the Online Help for information on installing a network client. E. Redistributing DCOM98: If you depend on DCOM98 functionality, you have two options: redistribute the updated system files (DCOM98) with your application, or point users at our DCOM98 Web release. Pointing users at the Web release is recommended if your application will be downloaded from the Web, because DCOM98 is fairly large and many users may already have it. For further information about redistributing DCOM98, please review the redistribution guidelines in DCOMDIST.TXT and the redistribution agreement in DCOMLIC.TXT. F. Support and Resources: For more information about the Distributed Component Object Model (DCOM), please see the following URL: http://www.microsoft.com/com/dcom/dcom98/dcom1_3.asp For more information on your support options for this product, please refer to Support Options by Product online at: http://support.microsoft.com/default.aspx?scid=fh;EN-US;CNTACTMS Additional query words: ====================================================================== Keywords : kbsetup kbtophit kbDCOM kbOSWinNT kbRegistry kbVBp600 kbVS600 kbOSWin95 kbGrpDSVB Technology : kbVBSearch kbAudDeveloper kbZNotKeyword6 kbZNotKeyword2 kbVB600Search kbVB600 Version : :6.0 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.