DOCUMENT:Q253995  05-MAY-2001  [visualc]
TITLE   :BUG: Connecting to Emulation Hangs Developer Studio
PRODUCT :Microsoft C Compiler
PROD/VER:WINDOWS:6.0
OPER/SYS:
KEYWORDS:kbide kbMiscTools kbVC600 kbOSWinCEsearch kbEmulatex86 kbDSupport kbGrpDSVCCompiler

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows CE Toolkit for Visual C++ 6.0 
 - Microsoft Windows CE Toolkit for Visual Basic 6.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

If you try to download or run a remote tool in a Windows CE emulation
environment, a remote connection may be initiated; however, it may then stop
responding or hang indefinitely.

CAUSE
=====

To use the Windows CE emulation environment, you must have Transfer Control
Protocol/Internet Protocol (TCP/IP) networking support. Also, a bug in the
emulation TCP/IP transports may require that the workstation TCP/IP be
configured for Dynamic Host Configuration Protocol (DHCP).

RESOLUTION
==========

Try one of the following solutions to enable emulation connectivity:

 - If the workstation is using a static IP address, ensure that the address is a
   valid workstation address (the first and last addresses of a subnet are not
   valid workstation addresses). Please see your network administrator for more
   details.

 - Install TCP/IP networking for your operating system and configure for DHCP.
   If you do not have a DHCP server available, you may not be able to connect
   with the emulation environment.

 - Delete the following components from the emulator \Windows folder and attempt
   the connection again:

    - Cemgrc.exe
    - Cetlstub.dll
    - Tcpipc.dll
    - Tlcesrv.dll
    - Tlppp.dll
    - Toolhelp.dll
    - Cemon.exe
    - Cefwcli.exe
    - Cehwcli.exe
    - Cepwcli.exe
    - Ceregcli.exe
    - Cespycli.exe
    - Cezcli.exe

 - Connect your desktop computer to a Windows CE device by using Microsoft
   Windows CE Services or ActiveSync 3.0, before you try to establish a
   connection with the emulator.

 - If your system is using Microsoft Windows NT 4.0 Service Pack 6 (SP6),
   install Service Pack 6a.

STATUS
======

Microsoft has confirmed this to be a bug in the Microsoft products listed at the
beginning of this article.

REFERENCES
==========

For additional information, click the article number below to view the article
in the Microsoft Knowledge Base:

   Q226479 PRB: EndDialog May Hang in Emulation Environment

Additional query words: platform manager

======================================================================
Keywords          : kbide kbMiscTools kbVC600 kbOSWinCEsearch kbEmulatex86 kbDSupport kbGrpDSVCCompiler 
Technology        : kbVCsearch kbVBSearch kbAudDeveloper kbWinCETKVBSearch kbWinCETKVCSearch kbWinCESearch kbWinCETK600VC
Version           : WINDOWS:6.0
Issue type        : kbbug
Solution Type     : kbpending

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.