DOCUMENT:Q109846  18-NOV-1999  [msdos]
TITLE   :ScanDisk Recommends Running DEFRAG on a Compressed Drive
PRODUCT :Microsoft Disk Operating System
PROD/VER:MS-DOS:6.2,6.22
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft MS-DOS operating system versions 6.2, 6.22 
-------------------------------------------------------------------------------

This information applies to both Microsoft DoubleSpace and Microsoft
DriveSpace. For MS-DOS 6.22, use DRVSPACE in place of DBLSPACE for commands
and filenames.

SYMPTOMS
========

You may receive the following message while ScanDisk is examining your
compressed drive

   DoubleSpace drive <X> needs to be defragmented. To defragment drive
   <X>, run the Microsoft Defragmenter on it by typing "DEFRAG <X>:"
   (without the quotation marks) at the command prompt.

where X is the compressed drive. Choosing the More Information button displays
the following:

   DoubleSpace drive <X> is becoming highly fragmented internally. When a
   compressed drive becomes fragmented in this way, some free space becomes
   unusable until the drive is defragmented. To defragment drive <X>, run
   the Microsoft Defragmenter on it by typing DEFRAG <X>: at the command
   prompt.

Running DEFRAG <X>: (where X is the compressed drive) may not correct the
internal fragmentation in all cases.

CAUSE
=====

This message is displayed when 50 percent or more of the free space on the
compressed drive is fragmented. If all of the free space becomes fragmented,
DoubleSpace cannot write data to the compressed drive, even though free space
remains in the sector heap.


To determine the percentage of internal fragmentation on a compressed drive, type
"dblspace /info <X>:" (without the quotation marks) (where X is the
compressed drive) at the MS-DOS command prompt.

RESOLUTION
==========

In most instances, running Microsoft Defragmenter (Defrag) on the compressed
drive corrects this problem. Defrag runs DBLSPACE /DEFRAG to consolidate free
space at the end of the compressed volume file (CVF). If this does not resolve
the ScanDisk warning, thoroughly defragment your compressed drive using the
following procedure (where <X> is the compressed drive):

1. Run DBLSPACE /DEFRAGMENT <X>:

   This moves all free space to the end of the CVF.

2. Run DBLSPACE /DEFRAGMENT /F <X>:

   This moves all free space to the front of the CVF.

3. Run DBLSPACE /DEFRAGMENT <X>:

   This moves all free space back to the end of the CVF.

NOTE: This procedure may take several hours to complete, depending on the size of
the drive and level of fragmentation. You may want to place the above commands
in a batch file and let it run overnight.

All the unused sectors should then be contiguous in the sector heap. For more
information on this procedure, query on the following words in the Microsoft
Knowledge Base:

   " dblspace and defragment and sectors and free " (without the quotation
   marks)

MORE INFORMATION
================

DoubleSpace compresses data one FAT cluster (8 kilobytes[K]) at a time and must
write the data to the sector heap in contiguous sectors. If the data is not
compressible at all, DoubleSpace requires 8K (16 sectors) of contiguous sectors
in the sector heap to write the data. If there are not 16 available contiguous
sectors in the sector heap, DoubleSpace cannot write the data to the compressed
drive until the drive is defragmented.

When 50 percent or more of the free space in the CVF cannot be mapped to 8K of
contiguous sectors in the sector heap, ScanDisk displays the above message.
ScanDisk and DBLSPACE /INFO use the same algorithm for reporting internal CVF
fragmentation. If 100 percent of the free space in the sector heap is
fragmented, DoubleSpace may be unable to write any more data to the drive.

Every CVF contains a standard 12-bit or 16-bit MS-DOS file allocation table (FAT)
with a cluster size of 8192 bytes (8K). The cluster size cannot be changed.
DoubleSpace maps each 8K FAT cluster to a Microsoft DoubleSpace FAT (MDFAT)
entry. Each MDFAT entry maps to individual sectors in the sector heap, and the
sectors used for an individual MDFAT entry must be contiguous.

Additional query words: 6.20 frag notes online help

======================================================================
Keywords          :  
Technology        : kbMSDOSSearch kbMSDOS622 kbMSDOS620
Version           : MS-DOS:6.2,6.22

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.