XCLN: How to install the Microsoft Exchange Macintosh Client

ID: Q156218


The information in this article applies to:


SUMMARY

The Microsoft Exchange client for the Apple Macintosh adds to the client platforms available in Microsoft Exchange Server version 4.0. The Microsoft Exchange Client for the Apple Macintosh supports advanced features such as grouping and filtering in views, discussion databases, auto-signature, rules, sending and sharing of documents, digital signatures, offline folders, and access to the Internet through the Microsoft Exchange Internet Mail Connector.

The Mac client can be found at:

ftp://ftp.microsoft.com/bussys/exchange/exchange-public/fixes/Eng/Exchg4.0/Sp2/Mac


MORE INFORMATION

Setting up the Microsoft Exchange Client on Your Macintosh

Your Macintosh must have at least 8 MB of RAM to run the Microsoft Exchange client. If you have only 8 MB of RAM, and the system consumes more than 3 MB, you need to remove some extensions for Microsoft Exchange to run.

Before you start:

  1. In Control Panels, double-click Memory.


  2. Turn on 32-bit addressing.


We recommend that you use System 7.5.3 or later. Additionally, on the Power Macintosh, we recommend that Virtual Memory be turned ON and set to a minimum of 1 MB plus installed physical memory. For example, if your Power Macintosh has 16 MB of memory installed, you should set virtual memory to 17 MB.

Follow these steps:
  1. Download the file Sp2_40ma.exe and unzip it.


  2. Copy Sp2_40ma.hqx to a Macintosh or PowerMac.


  3. Convert the file from binhex format. (This will require a utility on the Macintosh to convert from BinHex format.)


  4. Double-click on the Sp2_40ma file and it will self-expand.


  5. Open the Microsoft Exchange folder.


  6. Double-click Microsoft Exchange Setup and follow the instructions.


  7. Start the Microsoft Exchange client. The Profile Wizard guides you through the process of creating a new profile.


-or-
  1. Download Sp2_40_Mac_Client.hqx to a Macintosh or PowerMac.


  2. Convert the file from binhex format. (This will require a utility on the Macintosh to convert from BinHex format.)


  3. Double-click on the Sp2_40ma file and it will self-expand.


  4. Open the Microsoft Exchange folder.


  5. Double-click Microsoft Exchange Setup and follow the instructions.


  6. Start the Microsoft Exchange client. The Profile Wizard guides you through the process of creating a new profile.


If you download the .HQX file, use one of the decoding utilities such as StuffIt or Compact Pro, to decode the file into its original format by doing the following: Supported Protocols:

Both AppleTalk and TCP/IP are supported. If you are using classic networking and MacTCP, use version 2.06 or later. If you are using Open Transport Networking and TCP/IP, you must have System 7.5.3 or later.

Additional query words:


Keywords          : kbsetup XCLN 
Version           : WINDOWS:4.0
Platform          : WINDOWS 
Issue type        : kbhowto 

Last Reviewed: April 2, 1999