DOCUMENT:Q73253 21-NOV-1999 [msdos] TITLE :Removing Ontrack Disk Manager Partitions PRODUCT :Microsoft Disk Operating System PROD/VER:MS-DOS:3.3,4.0,4.01,5.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft MS-DOS operating system versions 3.3, 4.0, 4.01, 5.0 ------------------------------------------------------------------------------- SUMMARY ======= The following procedure outlines the steps to remove Ontrack Disk Manager versions 3.3 through 4.21 partitions from a hard drive to allow replacement with MS-DOS FDISK partitions. The following script assumes that the first partition on the hard disk is marked as bootable. Please note that if another partition is marked as bootable, this procedure results in an unbootable system. MORE INFORMATION ================ 1. Locate the Ontrack Disk Manager program DM.EXE, and start it by typing the following command: " dm /m " (without the quotation marks) 2. Press P to enter the partitioning menu. 3. Press D to choose delete partition. 4. Disk Manager will prompt you with the message Enter partition number (n): where n equals the last partition number. Type in the number of the last partition (for example, if there are three partitions, enter "3" (without the quotation marks)). 5. Press ENTER to accept the default. This removes the last partition on the hard drive. You will see this partition removed from the list of partitions at the top of the screen. 6. Repeat steps 3-5 until only one partition remains on the list at the top of the screen. WARNING: Be careful not to delete all the partitions, which would leave you without a boot drive. If this occurs, press R to return to main menu, and respond NO to the following prompt Write the above partition data to the disk? by pressing N and then pressing the ENTER key. 7. After all partitions except the boot partition have been deleted, press R to return to the main menu. 8. At the following prompt, press Y, then press ENTER. Write the above partition data to the disk? 9. Press ESC to exit Disk Manager. 10. Press Y, then press ENTER key to verify that you want to exit Disk Manager. 11. Press ENTER to reboot the machine. The hard drive is now ready to be partitioned using MS-DOS FDISK. This can be done with the current version of MS-DOS, or after updating to MS-DOS 5.0. The product included here, Disk Manager, is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability. Additional query words: 3.30 4.00 4.01 5.00 dmdrvr.bin third-party 3rdparty ====================================================================== Keywords : Technology : kbMSDOSSearch kbMSDOS400 kbMSDOS500 kbMSDOS330 kbMSDOS401 Version : MS-DOS:3.3,4.0,4.01,5.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.