DOCUMENT:Q74307 17-DEC-2000 [msdos] TITLE :MS-DOS Upgrade Detects DOS Path as D:\DOS with Stacker PRODUCT :Microsoft Disk Operating System PROD/VER:MS-DOS:5.x,6.0,6.2,6.21,6.22 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft MS-DOS operating system versions 5.0, 5.0a, 6.0, 6.2, 6.21, 6.22 ------------------------------------------------------------------------------- SUMMARY ======= The MS-DOS 5 or later Upgrade and MS-DOS 6.2 Step-Up should not be used to upgrade a primary DOS partition being compressed by Stacker. The upgrade identifies the DOS path as D:\DOS. There is no way to change the drive letter. When setup is complete, the disk will not be bootable. MORE INFORMATION ================ Stacker works by creating a file named STACVOL.xxx in the root directory of the drive to be compressed. Stacker then creates a new drive that is contained within that file. When you access the new Stacker volume, the Stacker program compresses and decompresses data to and from the STACVOL.xxx file stored in the root of the compressed drive. Typically, the MS-DOS 5 upgrade will report that there is not enough free disk space to install in a Stacker volume. The Setup program is not fooled by the SSWAP.COM program; Setup finds the real primary DOS partition, even if it has been swapped to the D drive, and checks the free space. Typically, there is little free space on this drive due to the STACVOL.xxx file. WORKAROUND ========== The following procedure will upgrade a system using Stacker on the D drive: 1. Install the MS-DOS Upgrade to floppy disks. 2. Run SYS on the drive that was the C drive at boot time. 3. Copy COMMAND.COM to the drive that was the C drive at boot time. 4. Copy IO.SYS, MSDOS.SYS, and COMMAND.COM to the Stacker volume. 5. Copy all files from the floppy disks to the C:\DOS subdirectory on the Stacker volume. NOTE: If you are using MS-DOS 5.0 or later you can skip step 3 as SYS copies COMMAND.COM automatically. You may also want to set the attributes on MSDOS.SYS and IO.SYS to hidden files. The product included here is manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability. Additional query words: 6.22 5.00 3rdparty 6.00 6.20 ====================================================================== Keywords : Technology : kbMSDOSSearch kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600 kbMSDOS500 kbMSDOS500a Version : MS-DOS:5.x,6.0,6.2,6.21,6.22 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.