DOCUMENT:Q96829 17-DEC-2000 [msdos] TITLE :Explanation of the WINA20.386 File PRODUCT :Microsoft Disk Operating System PROD/VER:MS-DOS:5.x,6.0,6.2,6.21,6.22 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft MS-DOS operating system versions 5.0, 5.0a, 6.0, 6.2, 6.21, 6.22 ------------------------------------------------------------------------------- SUMMARY ======= The WINA20.386 file is a read-only file that is copied to the root directory on your hard disk (startup) drive when you set up MS-DOS 5 Upgrade, MS-DOS 6 Upgrade, or MS-DOS 6.2 Upgrade on a computer that is capable of running Microsoft Windows in 386 enhanced mode. Microsoft Windows version 3.0 cannot run in 386 enhanced mode without this file. NOTE: You do not need the WINA20.386 file if you run any other version of Microsoft Windows, or if you do not run Microsoft Windows version 3.0 in 386 enhanced mode. For a discussion on running the 386 enhanced, standard, and real modes in Microsoft Windows, see the Microsoft Windows "User's Guide." MORE INFORMATION ================ If you do not have the WINA20.386 file and you try to run Windows version 3.0 in 386 enhanced mode, the following message is displayed: You must have the file WINA20.386 in the root of your boot drive to run Windows in Enhanced Mode Installing the File ------------------- If you see this message, use the EXPAND command to expand and copy this file from your MS-DOS installation disk to the root directory of your startup drive. The file is located on the following disks: MS-DOS Version 3.5-inch Disks 5.25-inch Disks ------------------------------------------------------ MS-DOS 5.0 Upgrade 3 5 MS-DOS 6.0 Upgrade 1 2 MS-DOS 6.2 Upgrade 1 2 MS-DOS 6.21 Upgrade 1 2 To install the file, insert your installation disk in your floppy disk drive, type the following at the MS-DOS command prompt, and press ENTER " expand :\wina20.38_ :\wina20.386" (without the quotation marks) where is the floppy disk drive containing your MS-DOS installation disk and is your startup drive (usually drive C). For example if your floppy disk drive is drive A and your startup drive is drive C, type the following command: " expand a:\wina20.38_ c:\wina20.386" (without the quotation marks) Deleting the WINA20.386 File ---------------------------- You can delete the WINA20.386 file from your hard disk if you do not use Microsoft Windows version 3.0 in 386 enhanced mode. To delete the file: 1. Remove the read-only attribute by typing the following at the MS-DOS command prompt and pressing ENTER: " attrib -r :\wina20.386" (without the quotation marks) 2. Delete the file by typing the following command: " del :\wina20.386" (without the quotation marks) Moving the WINA20.386 File -------------------------- You can move the WINA20.386 file to a new directory as follows: 1. Copy WINA20.386 to the new location. Type the following at the MS-DOS command prompt and press ENTER " copy :\wina20.386 :\wina20.386 " (without the quotation marks) where is the drive and directory to which you are moving WINA20.386. For example, if you are moving WINA20.386 to your Windows SYSTEM subdirectory on drive C, type the following at the MS-DOS command prompt and press ENTER: " copy c:\wina20.386 c:\windows\system\wina20.386 " (without the quotation marks) NOTE: If you have MS-DOS 6 or 6.2 Upgrade, substitute MOVE for COPY in the command shown above and skip to step 4. 2. Use a text editor, such as MS-DOS Editor, to open your CONFIG.SYS file. If you want to use MS-DOS Editor, type the following at the MS-DOS command prompt and press ENTER: " edit :\config.sys" (without the quotation marks) 3. Add the following command on a line of its own at the end of your CONFIG.SYS file: " switches=/w" (without the quotation marks) 4. Save your CONFIG.SYS file. If you are using MS-DOS Editor, choose Exit from the File menu. When MS-DOS Editor displays a dialog box prompting you to save your file, choose the Yes button or press ENTER. 5. Use the text editor to open your Windows SYSTEM.INI file. (This file should be in your Windows directory.) 6. Find the section that begins with the header [386Enh]. 7. Add this command under the [386Enh] heading " device=\wina20.386" (without the quotation marks) where specifies the new location of the WINA20.386 file. For example, if you want to move the file to your WINDOWS directory, add the following command to your Windows SYSTEM.INI file: " device=c:\windows\wina20.386" (without the quotation marks) 8. Save your SYSTEM.INI file. If you're using MS-DOS Editor, choose Exit from the File menu. When MS-DOS Editor displays a dialog box prompting you to save your file, choose the Yes button or press ENTER. 9. Restart your computer by pressing CTRL+ALT+DEL. Additional query words: 6.22 6.00 5.00 6.20 dos ====================================================================== Keywords : Technology : kbMSDOSSearch kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600 kbMSDOS500 kbMSDOS500a Version : MS-DOS:5.x,6.0,6.2,6.21,6.22 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.