DOCUMENT:Q75894  10-DEC-1999  [win95x]
TITLE   :PaintJet Printer Fonts Included with Windows
PRODUCT :Microsoft Windows 95.x Retail Product
PROD/VER:WINDOWS:3.0,3.0a
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows versions 3.0, 3.0a 
-------------------------------------------------------------------------------


SUMMARY
=======

There are three specific font files, .PJFs, for the HP PaintJet printer included
with the Microsoft Windows version 3.0 and 3.0a Setup disks. The names of each
of the files are listed below:

 - CR124PA.PJF

 - LG08RPA.PJF

 - LG12RPA.PJF

MORE INFORMATION
================

The location of these files depends on the version of Windows (3.0 or 3.0a) and
the size of the Setup disks being used. Use the following chart to pinpoint
their location.

Windows Version   Disk Size        Disk #
-----------------------------------------------
   3.00           [5.25\1.2MB]     Disk #5
   3.00           [3.5\720K]       Disk #7
   3.00           [5.25\360K]      Disk #12
   3.00a          [5.25\1.2MB]     Disk #5
   3.00a          [3.5\720K]       Disk #5
   3.00a          [3.5\720K]       Disk #6

CR12RPA.PJF, LG08RPA.PJF, LG12RPA.PJF
-------------------------------------

PJFs are PaintJet Fonts for the PaintJet driver that Zenographics wrote for
Microsoft. They can be installed by using the Windows Control Panel using the
font installer. The installation steps listed below will provide assistance in
the configuration of these printer fonts.

Steps to Install PaintJet Fonts
-------------------------------

1. Run the Control Panel.

2. Select the Printers icon from the Control Panel.

3. Double-click the PaintJet driver in the listing of Install Printers to make
   it active or install the driver and then choose Active from the Status Box.

4. Choose the Configure button on the right-hand side.

5. Choose the Setup button from the Printers Configure dialog box.

6. Choose the Fonts button from the HP PaintJet Setup dialog box.

7. Choose the Add button and choose the desired fonts to be installed.

8. Choose OK.


Additional query words: 3rdparty 3.00 3.00a

======================================================================
Keywords          :  
Technology        : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a
Version           : WINDOWS:3.0,3.0a

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.