DOCUMENT:Q89021  14-DEC-1999  [win95x]
TITLE   :Memory Configurations Needed on HP LaserJets for Printing
PRODUCT :Microsoft Windows 95.x Retail Product
PROD/VER:WINDOWS:3.0,3.0a,3.1,3.11
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11 
-------------------------------------------------------------------------------


SUMMARY
=======

This article discusses the amount of RAM that different Hewlett-Packard (HP)
LaserJet printers need for the following operations:

 - Printing full-page graphics

 - Printing with the HP PostScript cartridge

 - Printing the HP LaserJet hardware configuration page

MORE INFORMATION
================

Printing Full-Page Graphics
---------------------------

The minimum additional memory required to support each type of printer is listed
below:

                    Mem Req'd     Mem Req'd    Default
   Model            for 300 dpi   for 150 dpi  Memory
   ------------------------------------------------------------------

   HP LaserJet II   1 MB          N/A          640K
   HP LaserJet IID  2 MB          1 MB         640K  (in duplex mode)

Printing with the HP PostScript Cartridge
-----------------------------------------

When an HP PostScript cartridge is used with an HP LaserJet printer, additional
memory is required for duplex printing and printing letter or legal size pages.
The minimum additional memory required to support each type of printer is listed
below:

   Model                  Letter   Legal     Duplex    Default Memory
   ------------------------------------------------------------------

   HP LaserJet III        1   MB   2   MB    N/A       1 MB
   HP LaserJet IIP        1.5 MB   2.5 MB    N/A       512K
   HP LaserJet IID        2.5 MB   2.5 MB    4.5 MB    512K
   HP LaserJet IIID       2   MB   2   MB    4   MB    1 MB

Printing the HP LaserJet Hardware Configuration Page
----------------------------------------------------

The HP LaserJet printer can report details about its hardware configuration. To
print this information:

1. Turn the printer's ONLINE button off.

2. Press the PRESS FONTS TEST option until the message "Test page queued" is
   displayed.

You can now print the printer configuration information, including the amount of
memory installed.

Additional query words: 3rdparty WIN30 3.00 3.0 3.00a 3.0a LJII LJIII LJIIP LJIID LJIIID LJ2 LJ3 LJ2P LJ2D LJ3D series win31

======================================================================
Keywords          :  
Technology        : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a kbWin310 kbWin311
Version           : WINDOWS:3.0,3.0a,3.1,3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.