DOCUMENT:Q98564  19-SEP-1999  [winmisc]
TITLE   :Troubleshooting Sound Support for MS-DOS Games in WSS 1.0a
PRODUCT :Miscellaneous Windows Products
PROD/VER:
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows Sound System, version 1.0a 
-------------------------------------------------------------------------------

SUMMARY
=======

Windows Sound System version 1.0a software provides Sound Blaster emulation,
which enables you to use a larger variety of MS-DOS-based games that use the
Sound System hardware. To get Sound Blaster support, you must run your
MS-DOS-based game in full-screen mode from the MS-DOS Prompt program in Windows
running in 386 enhanced mode.

However, some MS-DOS-based games may not work properly when run this way and you
may experience problems using the Sound Blaster emulation. When this happens,
try the following troubleshooting tips:

1. Ensure that you have enough system resources to run the game in MS-DOS; check
   the documentation included with the game for system requirements and test the
   game in MS-DOS. The Sound System board provides AdLib support for synthesized
   sounds in MS-DOS.

2. Find out if there are any restrictions when running the game in full-screen
   mode from the MS-DOS Prompt program with Windows; some games will not run
   from MS-DOS Prompt with Windows running in 386 enhanced mode. In some cases,
   you'll need to modify your CONFIG.SYS and AUTOEXEC.BAT files to free
   conventional memory for your game to run properly in MS-DOS; again check the
   game documentation.

   Also make sure that you have the maximum amount of conventional memory
   possible under MS-DOS Prompt while in Windows 386 enhanced mode by checking
   the PIF settings in your DOSPRMPT.PIF file. Consult your Windows manual for
   information on how to use the PIF Editor.

3. If there are no problems with running the game with Windows, you can go ahead
   and test for sound support. AdLib support will also be available from MS-DOS
   Prompt with Windows. Test the game with AdLib support.

4. Test the game with Sound Blaster support. Enable Sound Blaster support or
   emulation by running the Games Configuration program from the Windows Sound
   System group. You must be careful not to create an IRQ or I/O address
   conflict when you enable digitized sounds because you must select IRQ 7 or 9
   and an I/O address between 220h and 260h (here "h" means Hexadecimal). The
   defaults are IRQ 7 and I/O 220h, and will work most of the time. Also you'll
   need to have the DMA channel set to 1 before you can enable digitized sounds.

5. Once Sound Blaster emulation has been set, test the game by running it in
   full-screen mode from MS-DOS Prompt with Windows running in 386 enhanced mode
   and not by running in a MS-DOS window. Most MS-DOS-based games will not work
   in a MS-DOS window. Playing digitized sounds through an MS-DOS-based game
   will in many cases require more conventional memory; therefore, if the game
   seems to stop when it plays a digitized sound (where a digitized sound could
   be a human voice) you may need to free more conventional memory with MS-DOS.

NOTE: Some game developers are updating their games to support the Windows Sound
System in native mode. You should contact the manufacturer of the game to see if
the company is planning to release such a game.

Additional query words: 1.0a arcade fun lockup lock up freeze hang crash tshoot

======================================================================
Keywords          :  
Technology        : kbWinSoundSysSearch kbWinSoundSys100a

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.